Freecom SUPERLOADER3 LTO2-HH Manual page 68

Chapter 4 On-board Remote Management
Configuration Page
50
2 Click .
submit
Setting Security Options
When you enable the security option, users must enter a password to
access the autoloader's front panel functionality. A password allows
either administrator-level access or operator-level access (see
Security on page 70). To set security:
1 From any page, click the
screen displays.
2 On the left-hand side of the screen, click
section of the screen displays.
Security
3 To enable front panel security, select the check box next to
.
Security Enabled
4 If the check box is blank, the security option for the front LCD panel
is not enabled.
5 Click .
submit
To reset the front panel password:
1 From any page, click the
screen displays.
2 On the left-hand side of the screen, click
3 Select the check box next to
mark appears.
4 Click .
submit
To set
User Administration
1 From any page, click the
screen displays.
2 On the left-hand side of the screen, click
3 From the drop-down list next to
,
Operator 2 Administrator 1
4 In the field, enter a user name.
Username
5 In the field, enter the new password.
Password
6 In the
Verify Password
SuperLoader 3 Autoloader User's Guide
heading. The
Configuration
Security
heading. The
Configuration
Security
Reset Front Panel Password
:
heading. The
Configuration
Security
Select User Type
or
Administrator 2
field, re-enter the same new password.
Setting
Configuration
. The
System
Front Panel
Configuration
.
. A check
Configuration
.
, select
Operator 1
.
4
,