RGBlink MSP405 User Manual page 5

There are no user-serviceable parts within the unit. To avoid personal injury, do not
remove the top cover. Do not operate the unit without the cover installed.
Use the Proper Power Cord
Use only the standard power cord for your product.
Do Not Operate in Explosive Atmospheres
To avoid explosion, do not operate this product in an explosive atmosphere.
Installation Safety Summary
Safety Precautions
For all MSP 405 installation procedures, please observe the following important safety
and handling rules to avoid damage to yourself and the equipment.
Unpacking and Inspection
Before opening MSP 405 shipping box, inspect it for damage. If you find any damage,
notify the shipping carrier immediately for all claims adjustments. As you open the box,
compare its contents against the packing slip. If you find any shortages, contact your
sales representative.
Once you have removed all the components from their packaging and checked that all
the listed components are present, visually inspect the system to ensure there was no
damage during shipping. If there is damage, notify the shipping carrier immediately for all
claims adjustments.
Site Preparation
The environment in which you install your MSP 405 should be clean, properly lit, free from
static, and have adequate power, ventilation, and space for all components.
MSP 405 User Manual
5