Subscribe to Our Youtube Channel
Related Manuals for RGBlink MSP405
Summary of Contents for RGBlink MSP405
- Page 1 MSP 405 12G SDI/ 4K HDMI//Fiber Converter User Manual Article No: RGB-RD-UM-MSP 405 E001 Version No: V1.3...
- Page 2 Content Declarations ..................4 FCC/Warranty ..................4 Operators Safety Summary ............... 4 Installation Safety Summary ............. 5 Chapter 1 About Your Product ............6 1.1 Product Overview .................6 1.2 Key Features .................7 1.3 Panel Introduction ............... 7 1.3.1 Front Panel Description ..............7 1.3.2 Interface Panel Description .............
- Page 3 3.6 Audio ................... 23 Chapter 4 Order Code ............... 24 4.1 Product Code ................24 Chapter 5 Support ................25 Chapter 6 Appendix ................26 6.1 Specification ................26 6.2 DIP Switch Description ..............26 6.3 Interface Performance .............. 28 6.4 Upgrade Guide ................29 6.5 Revision History .................
- Page 4 30 days after the transfer of risks. In the event of justified notice of compliant, RGBlink can repair the fault or provide a replacement at its own discretion within an appropriate period. If this measure proves to be impossible or unsuccessful, the purchaser can demand a reduction in the purchase price or cancellation of the contract.
- Page 5 There are no user-serviceable parts within the unit. To avoid personal injury, do not remove the top cover. Do not operate the unit without the cover installed. Use the Proper Power Cord Use only the standard power cord for your product. Do Not Operate in Explosive Atmospheres To avoid explosion, do not operate this product in an explosive atmosphere.
- Page 6 Chapter 1 About Your Product 1.1 Product Overview The MSP 405 is a professional video converter designed for high-demand 4K ultra-high-definition applications. It boasts HDMI, SDI, and fiber optic interfaces, supporting various video signal inputs and outputs. All interfaces support video transmission up to 3840×2160P@60Hz in ultra-high-definition, with backward compatibility for 1920×1080P@60Hz HD resolution and 1280×720P@60Hz SD resolution.
- Page 7 1.2 Key Features ● Arbitrary format conversion between 12G SDI, HDMI2.0 and fiber signals. ● Multiple embedded test pattern for HDMI, SDI, fiber signal tests. ● LCD touch screen for input signal monitoring and menu operation. ● Two external batteries as main and backup power supplies, allowing automatic battery switch.
- Page 8 DIP switch icon. ❹ Ethernet port icon. ❺ Power jack icon. ❻ HDMI output port icon. ❼ HDMI input port icon. ❽ Analog audio output icon. ❾ Analog audio input icon. ❿ 1.3.2 Interface Panel Description ❹ ❺ ❽ ❷ ❻...
- Page 9 To reset the IP address to the default address IP Reset Button 192.168.5.100 by inserting a hard probe into the hole to ❺ press the internal reset button. Power Socket USB Type-C power socket supports 12V/1.5A power supply. ❻ Fiber input/output port. Connect to the SFP modules, and transmit signals to another MSP 405 via an optical fiber cable.
- Page 10 1.4 Dimension Following is the dimension of MSP 405 for your reference: 147.9mm × 98.4mm × 41.9mm. MSP 405 User Manual...
- Page 11 Chapter 2 Menu Introduction 2.1 Menu MSP 405 embeds 2.4-inch LCD touch screen for video signal preview and menu control. MSP 405 will display preview interface automatically when powered on. Tap screen to enter main interface. ❷ Item Description Device name ❶...
- Page 12 Embedded audio. Enter to enable and disable the analog ❺ audio input and output. Setting. Tap to check firmware version, set language, set ❻ IP address, reset, etc.. MSP 405 User Manual...
- Page 13 Chapter 3 Use Your Product MSP 405 is a device that functions as both a transmitter and receiver. Designed for flexibility, it supports signal transmission cross various interfaces: SDI to HDMI + optical fiber, HDMI to SDI + optical fiber, and optical fiber to SDI + HDMI when paired with another MSP 405 unit.
- Page 14 Ensure that all devices are in good condition with no damage or abnormalities. 2. Check the Power Adapter Verify that the power adapter or battery meets the required voltage of 12V , power of 18W and current of no less than 1.5A. 3.
- Page 15 to enter the mode selection interface. Set the MSP 405 to SDI input to HDMI/Fiber output. 3. Check SDI Input Signal Check the SDI input signal via the MSP 405’s LCD screen. If the signal is not displayed, first check if the MSP 405 is receiving adequate power, then verify the output of the SDI camera, and try using a shorter cable to connect the MSP 405 and SDI camera if necessary.
- Page 16 1. Connect HDMI and SDI Cables Use an HDMI cable to connect the HDMI output port of the SDI signal (e.g., a computer) to the HDMI input port of the MSP 405 device 1. Use an SDI cable to connect the SDI output port of the MSP 405 to the SDI input port of the SDI monitor.
- Page 17 monitoring of the SDI input from the camera. 2. Select a Mode to enter the mode selection interface. Set MSP 405 Device 1 to HDMI Input to Fiber and SDI Output mode. 3. Set MSP 405 Device 2 to Fiber Input to HDMI Output mode. 4.
- Page 18 Output Input 6. Connect the HDMI output port of the MSP 405 Device 2, which receives fiber signal, to your terminal display so as to enable conversion between fiber and HDMI signals. 3.4 Application Example 4 1. Connect HDMI and SDI Cables Use an SDI cable to connect the SDI output port of a device (e.g., a camera) to the SDI input port of MSP 405 Device 1.
- Page 19 Fiber and HDMI Output mode. 3. Set MSP 405 Device 2 to Fiber Input to HDMI and SDI Output mode. 4. Prepare two fiber optic cables and the corresponding SFP pluggable transceivers. First, insert the pluggable transceivers into the fiber optic interface slots of two MSP 405 devices respectively.
- Page 20 3.4 Test Modes The MSP 405 can be served as an all-in-one field testing "Swiss Army knife" to verify input/output interface functionality during system deployment, significantly improving setup and testing efficiency. Application Scenario 1: Output Signal Verification The MSP 405 provides multiple built-in test templates to rapidly validate display integrity, synchronization accuracy, and signal stability.
- Page 21 3. Select a test template (color bars, grid, etc.). Enable ”TP Motion” for dynamic pattern display. 4. Templates will show on connected displays while being output via SDI/HDMI/fiber simultaneously. Application Scenario 2: Input Interface Testing The MSP 405 can function as a temporary display substitute to test output interfaces of other devices.
- Page 22 Application Scenario 3: Source Device Validation Test signal sources (e.g., cameras, media servers) by routing their outputs to the MSP 405. Connect SDI output from broadcast cameras. Feed HDMI signals from PCs/media servers. Real-time input monitoring confirms signal health. 3.5 Loop Modes The MSP 405 supports zero-latency loop-through conversion, enabling real-time signal conversion between SDI, HDMI, and fiber while preserving the original resolution.
- Page 23 Choose the desired output format (e.g., SDI→HDMI+fiber). Verify real-time output using the connected reference monitor or the built-in test patterns. 3.6 Audio MSP 405 requires enabling Line In to ingest external signals without distortion, while Line Out must be activated to output processed video; disabling either will interrupt the corresponding signal chain, though the core conversion function remains operational.
- Page 24 Chapter 4 Order Code 4.1 Product Code Order Code Item 601-0405-01-0 MSP 405 MSP 405 User Manual...
- Page 25 Chapter 5 Support MSP 405 User Manual...
- Page 26 Chapter 6 Appendix 6.1 Specification Interface Input HDMI 1×HDMI-A 1×BNC Fiber 1×LC Output HDMI 1×HDMI-A 1×BNC Fiber 1×LC Audio Line In 1×3.5mm Audio Socket Line Out 1×3.5mm Audio Socket Power Power 1×USB Type-C Power Jack Control 1×RJ45 Reset 1×IP Reset Button Switch 1×DIP Switch Performance...
- Page 27 1. Converts SDI signal to HDMI output, with format conversion, output resolution of 1920x1080P@60Hz. Mode 3 SDI → HDMI+OPT 2. Converts SDI signal to optical output, with clock recovery, supports loop output, no delay. 1. Converts SDI signal to HDMI output, with format conversion, output resolution of Mode 4 3840x2160P@60Hz.
- Page 28 Outputs 2K test pattern, with HDMI, optical, and Mode 13 Test Pattern _2K SDI outputs all at 1920x1080P@60Hz. Outputs 4K test pattern, with HDMI output at Mode 14 Test Pattern _4K 3840x2160P@60Hz. Outputs 4K test pattern, with HDMI, optical, and Mode 15 Test Pattern _4K SDI outputs all at 3840x2160P@60Hz.
- Page 29 3840×2160p25/29.97/30/50/59.94/60 Data Rate Supports HD-SDI, 3G-A-SDI, 3G-B-SDI, 6G-SDI, 12G-SDI, adaptive SMPTE292M, SMPTE424M, SMPTE2081-1:2015, Standards SMPTE2082-1:2015 Color Space YCbCr 4:2:2 Color Depth 10bit Audio 48kHz sample rate, 24-bit, stereo Transmission 1310±10nm Wavelength Transmission -3dBm~1dBm Power Reception 1260nm~1580nm Wavelength Reception -11dBm~1dBm Power Transmission Single-mode ≤50000 meters...
- Page 30 Load the upgrade file: Click “Choose File” and choose the MSP 405 firmware package. Select target modules and click “Upgrade”. The device will update automatically. MSP 405 User Manual...
- Page 31 6.5 Revision History The table below lists the changes of MSP 405 User Manual. Format Time ECO# Description Principal V1.0 2024-05-15 0000# First Release Aster 1. Add application example V1.1 2024-08-22 0001# 2. Update DIP switch description Aster 3. Add interface performance 1.
- Page 32 All information herein is Xiamen RGBlink Science & Technology Co Ltd. Unless otherwise noted. is a registered trademark of Xiamen RGBlink Science & Technology C o Ltd. While all efforts are made for accuracy at time of printing, we reserve the right to alter otherwise make change without notice.
Need help?
Do you have a question about the MSP405 and is the answer not in the manual?
Questions and answers