Hikmicro G Series User Manual
  1. Manuals
  2. Brands
  3. Hikmicro Manuals
  4. Thermal cameras
  5. G Series
  6. User manual
Hikmicro G Series User Manual

Hikmicro G Series User Manual

Handheld thermal camera
Hide thumbs Also See for G Series:
Table of Contents

Advertisement

Quick Links

Download this manual
Handheld Thermal Camera
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the G Series and is the answer not in the manual?

Questions and answers

Related Manuals for Hikmicro G Series

Summary of Contents for Hikmicro G Series

  • Page 1 Handheld Thermal Camera User Manual...

  • Page 2: Legal Information

    WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKMICRO BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT...
  • Page 3 AND REGULATIONS BEFORE PURCHASE OR USE OF THIS PRODUCT. PLEASE NOTE THAT YOU MAY HAVE TO APPLY FOR PERMITS, CERTIFICATES, AND/OR LICENSES BEFORE ANY PURCHASING, SELLING, MARKETING AND/OR USING OF THE PRODUCT. HIKMICRO SHALL NOT BE LIABLE FOR ANY SUCH ILLEGAL OR IMPROPER PURCHASING, SELLING, MARKETING, AND END USES AND ANY SPECIAL, CONSEQUENTIAL,INCIDENTAL, OR INDIRECT DAMAGES ARISING THEREOF.

  • Page 4: Regulatory Information

    Handheld Thermal Camera User Manual Regulatory Information Note These clauses apply only to the products bearing the corresponding mark or information. FCC Compliance Statement Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules.
  • Page 5 Handheld Thermal Camera User Manual The frequency bands and transmitting power (radiated and/or conducted) nominal limits applicable to the following radio equipment are as follows: Equipment Frequency Band and Power Model G31, G41, G41H, Wi-Fi 2.4 GHz (2.4 GHz to 2.4835 GHz): 20 dBm; Bluetooth 2.4 GHz 2.4 G61, G61H* GHz to 2.4835 GHz): 20 dBm Wi-Fi 5 GHz (5.15 GHz to 5.25 GHz): 23 dBm;...
  • Page 6 Handheld Thermal Camera User Manual equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info. Regulation (EU) 2023/1542(Battery Regulation): This product contains a battery and it is in conformity with the Regulation (EU) 2023/1542. The battery cannot be disposed of as unsorted municipal waste in the European Union.
  • Page 7 Handheld Thermal Camera User Manual (iii) The maximum antenna gain permitted doivent respecter le pire limites spécifiées for devices in the band 5725-5875 MHz pour le point-à-point et l'exploitation non shall comply with the e.i.r.p. limits point à point, le cas échéant. specified for point-to-point and non point- to-point operation as appropriate.
  • Page 8 Handheld Thermal Camera User Manual jeweiligen Endnutzer zu gewährleisten. Die Möglichkeit der unentgeltlichen Rückgabe eines Altgerätes besteht bei rücknahmepflichtigen Vertreibern unter anderem dann, wenn ein neues gleichartiges Gerät, das im Wesentlichen die gleichen Funktionen erfüllt, an einen Endnutzer abgegeben wird. Datenschutz-Hinweis: Altgeräte enthalten häufig sensible personenbezogene Daten.

  • Page 9: Symbol Conventions

    Handheld Thermal Camera User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazardous situation which, if not avoided, will or Danger could result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, Caution could result in equipment damage, data loss, performance...

  • Page 10: Safety Instruction

    Handheld Thermal Camera User Manual Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. Laws and Regulations Use of the product must be in strict compliance with the local electrical safety ●...
  • Page 11 Handheld Thermal Camera User Manual Use the battery provided by a qualified manufacturer. Refer to the product specification ● for detailed battery requirements. DO NOT charge other battery types with the supplied charger. Confirm there is no ● flammable material within 2 m of the charger during charging. When the device is powered off and the RTC battery is full, the time settings can be kept ●...

  • Page 12: Limited Warranty

    Handheld Thermal Camera User Manual Laser Light Supplement Warning Warning: The laser radiation emitted from the device can cause eye injuries, burning of skin or inflammable substances. Prevent eyes from direct laser and wear a pair of goggles for your safety. The operating wavelength of the eyewear should be longer than laser peak wavelength and its optical density should be higher than 0D5+.
  • Page 13 Handheld Thermal Camera User Manual COMPLIANCE NOTICE: The thermal series products might be subject to export controls in various countries or regions, including without limitation, the United States, European Union, United Kingdom and/or other member countries of the Wassenaar Arrangement. Please consult your professional legal or compliance expert or local government authorities for any necessary export license requirements if you intend to transfer, export, re-export the thermal series products between different countries.

  • Page 14: Table Of Contents

    Handheld Thermal Camera User Manual Contents Chapter 1 Overview ........................1 1.1 Device Description ......................1 1.2 Main Function ........................ 1 1.3 Appearance ........................3 Chapter 2 Preparation ....................... 6 2.1 Charge Device ........................ 6 2.1.1 Charge Device via Cable Interface ............... 6 2.1.2 Charge Device via Charging Base ................
  • Page 15 Handheld Thermal Camera User Manual 3.4.1 Set Alarm Mode Palettes ................... 26 3.4.2 Set Focus Mode Palettes ................... 28 3.5 Adjust Display Temperature Range ................29 3.5.1 Level Only Adjustment in Manual Mode ............30 3.5.2 Level or Span Adjustment in Manual Mode ............31 3.6 Adjust Digital Zoom .....................
  • Page 16 7.3.3 Edit Images ......................58 7.4 Export Files ........................60 7.4.1 Export Files to PC ....................60 7.4.2 Export Files to HIKMICRO Viewer ..............61 7.4.3 Export Files via Bluetooth ................... 61 7.5 Import and Manage Tag Note Templates ..............62 Chapter 8 Calculate Area Size ....................
  • Page 17 Handheld Thermal Camera User Manual 16.3 Upgrade Device ......................76 16.3.1 Upgrade Device via APP ................... 76 16.3.2 Upgrade Device by Upgrade File ..............76 16.4 Restore Device ......................77 16.5 Initialize Memory Card ....................77 16.6 About Calibration ....................... 77 Chapter 17 Appendix .......................

  • Page 18: Chapter 1 Overview

    Handheld Thermal Camera User Manual Chapter 1 Overview 1.1 Device Description Handheld Thermal Camera is a device with both optical images and thermal images. It can measure temperature and distance, record videos, take snapshots, and trigger alarms. It can also connect to Wi-Fi, hotspot and Bluetooth. The built-in high-sensitivity IR detector and high-performance sensor detect the variation of temperature and measure the real- time temperature.
  • Page 19 Device detects target humidity and marks the area of humidity higher than the set threshold with green. Client Software Connection Mobile Phone: Use HIKMICRO Viewer to view live image, capture snapshots, and record ● videos on your phone. You can also, analyze pictures offline, generate and share a report Connect Device via Wi-Fi , Connect via the app.

  • Page 20: Appearance

    Handheld Thermal Camera User Manual 1.3 Appearance...
  • Page 21 Handheld Thermal Camera User Manual Figure 1-1 Appearance...
  • Page 22 Handheld Thermal Camera User Manual Note The interface of the device may vary according to different models. Please refer to the ● actual product. The warning sign is under the laser and on the left of the device. ● Table 1-1 Interface Description Component Function Laser Button Hold the button to turn on laser, and release the button to turn off laser.

  • Page 23: Chapter 2 Preparation

    Handheld Thermal Camera User Manual Chapter 2 Preparation 2.1 Charge Device Caution The built-in cell battery that powers the real time clock (RTC) of the device may drain during longtime transportation or storage. It is recommended to recharge the RTC battery for the well-functioning of the device clock.

  • Page 24: Mount Hand Strap

    Handheld Thermal Camera User Manual Figure 2-1 Remove Battery Base 2. Hold the lock catches, and draw the battery base to take out the battery. 3. Insert the battery into the charging base. You can see the charging status via the pilot lamp on the charging base.
  • Page 25 Handheld Thermal Camera User Manual Figure 2-3 Insert Upper Part of Hand Strap 2. Fit the buckle on the device and tighten the screw with the supplied wrench. 3. Thread the lower part of the hand strap through the hole at the base of the device. Secure the hand strap with the hook-and-loop fastener.

  • Page 26: Mount Protective Cover

    Handheld Thermal Camera User Manual 2.3 Mount Protective Cover Attach the protective cover when the device is not in use. Steps 1. Align the threaded hole of the device with the mounting hole of the lens cover. 2. Insert the screw, and rotate it clockwise to fix the lens cover. Figure 2-5 Fix Protective Cover...

  • Page 27: Optional) Mount Interchangeable Lens

    Handheld Thermal Camera User Manual 2.4 (Optional) Mount Interchangeable Lens An interchangeable lens is an additional thermal lens that can be mounted to the device to change the original focal length to different ranges, so as to obtain different FOVs and scene scopes.
  • Page 28 Handheld Thermal Camera User Manual Figure 2-8 Mount the Lens 4. Optional: Rotate the interchangeable lens anticlockwise to dismount it. Figure 2-9 Dismount the Lens Note When a new interchangeable lens is mounted on the device, it takes about 2 minutes to achieve accurate temperature measurement.

  • Page 29: Optional) Calibrate Interchangeable Lens

    Handheld Thermal Camera User Manual 2.4.1 (Optional) Calibrate Interchangeable Lens This part introduces how to calibrate a newly mounted interchangeable lens, subject to your device (only some models are supported). Before You Start Avoid strong light (for example, sun light and white light source) when calibrating the ●...

  • Page 30: Power On/Off

    Handheld Thermal Camera User Manual Note If the measurement succeeds, the distance is displayed on the screen. If it fails, adjust ● the distance and try again. It is recommended to use a tripod to fix the camera if keeping it still is difficult. ●...

  • Page 31: Set Auto Power-Off Duration

    Handheld Thermal Camera User Manual 2.5.1 Set Auto Power-off Duration Go to Settings > Device Settings > Auto Off to set the automatic shutdown time for device as required. 2.6 Sleep and Wake Sleep and wake function is used to save energy and increase battery time. Sleep and Wake Manually Press to enter sleep mode and press it again to wake the device up.

  • Page 32: Button Control

    Handheld Thermal Camera User Manual Button control Press the navigation buttons to set parameters and configurations. Figure 2-12 Button Control Press , and to select parameters. ● Press to enter the submenu. ● Press to return to the previous menu. ●...
  • Page 33 Handheld Thermal Camera User Manual Table 2-1 Live View Interface Description Descriptions Status bar, where device working status, such as, battery and connections, are displayed. Select a temperature measurement range according to the temperature of your targets. System date and time. Main menu icon.

  • Page 34: Swipe-Down Menu

    Handheld Thermal Camera User Manual Status Description Display Bluetooth is on. Interchangeable Lens is mounted on the device and the interchangeable lens type is on the bottom right of the icon. The inspection data is transmitting to the device. Cast Screen is on. Compass is on.
  • Page 35 Handheld Thermal Camera User Manual Figure 2-15 Swipe-down Menu Table 2-4 Swipe-down Menu Description Descriptions Tap once to turn on/off Wi-Fi. Tap and hold to enter Wi-Fi configuration Connect Device via Wi-Fi for interface. For Wi-Fi configuration, see instructions. Tap once to turn on/off Bluetooth. Tap and hold to enter Bluetooth Pair Bluetooth configuration interface.
  • Page 36 Handheld Thermal Camera User Manual Descriptions Note Supported by certain models. Enter/exit route inspection mode. For route instruction introduction and Route Inspection for more information. usage guide, see Adjust screen brightness.

  • Page 37: Chapter 3 Display Settings

    Handheld Thermal Camera User Manual Chapter 3 Display Settings Note Your device will periodically perform a self-calibration to optimize image quality and measurement accuracy. In this process the image will pause briefly and you'll hear a "click" as a shutter moves in front of the detector. The self-calibration will be more frequent during start up or in very cold or hot environments.

  • Page 38: Laser Assisted Focus

    Handheld Thermal Camera User Manual 3.1.2 Laser Assisted Focus Aim the laser at the target and the device focuses automatically. Before You Start It is recommended to use this function in a non-glare environment, such as indoor ● environment. The target should have good light reflection, such as white paper and cable. ●...

  • Page 39: Continuous Autofocus

    Handheld Thermal Camera User Manual Figure 3-2 Switching Focus Note DO NOT adjust the focus ring when the device is auto focusing, otherwise it will interrupt ● the auto focusing process. If the target is not clearly focused in this mode, adjust the focus ring to fine-tune the ●...

  • Page 40: Set Screen Brightness

    Handheld Thermal Camera User Manual 3.2 Set Screen Brightness The device supports auto or manual screen brightness adjustment. Table 3-1 Screen Brightness Adjustment Method Operation Manual Go to Settings > Device Settings > Screen Brightness to adjust the screen brightness. Or tap , and drag it to adjust the screen brightness.

  • Page 41: Set Palettes

    Handheld Thermal Camera User Manual Note Select PIP, and enter PIP setting interface. Adjust position: Tap the PIP view, and drag it to the target position on screen. ● Adjust size: Tap one of the PIP view corners, and drag it to adjust the size. ●...
  • Page 42 Handheld Thermal Camera User Manual Palettes Description Example Rainbow The target displays multiple colors. It is suitable for scene without obvious temperature difference. Ironbow The target is colored as heated iron. Red Hot The hot part is red-colored in view. Fusion The hot part is yellow- colored and the cold part is...

  • Page 43: Set Alarm Mode Palettes

    Handheld Thermal Camera User Manual Palettes Description Example Rain The hot part in the image is warm-colored, and the else is cool-colored. Blue Red The hot part in the image is colored red, and the else is blue. 3. Press to exit the setting interface.
  • Page 44 Handheld Thermal Camera User Manual Table 3-3 Icon Description Icon Alarm Mode Description Example Above Set the alarm temperature, and the Alarm targets with the temperature higher than the set value are displayed in red. Below Set the alarm temperature, and targets Alarm with the temperature lower than the set value are displayed in blue.

  • Page 45: Set Focus Mode Palettes

    Handheld Thermal Camera User Manual Icon Alarm Mode Description Example Note Insulation detection should be conducted indoor. 3. Set a temperature range. - Press to select between upper limit and lower limit. Press to adjust the temperature. - Tap on the screen to select an interest area. The device automatically adjusts the upper and lower temperature limit of the selected scene.

  • Page 46: Adjust Display Temperature Range

    Handheld Thermal Camera User Manual Table 3-4 Icon Description Icon Palettes Description Example Mode Above Set the temperature threshold, and the Focus targets with the temperature higher than the set value are displayed with fusion palettes. Below Set the temperature threshold, and Focus targets with the temperature lower than the set value are displayed with fusion...

  • Page 47: Level Only Adjustment In Manual Mode

    Handheld Thermal Camera User Manual Steps 1. Select an adjustment mode. 1)In live view, press to call the main menu. 2)Tap 3)Choose Auto or Manual 2. Adjust the display temperature range. Auto Select . The device adjusts display temperature range according Adjustment to the actual targets temperature automatically.

  • Page 48: Level Or Span Adjustment In Manual Mode

    Handheld Thermal Camera User Manual Figure 3-3 Level Only Adjustment 5. Press to confirm. Note In Manual level & span mode, press on the left side of temperature scale to quickly adjust the temperature range. 3.5.2 Level or Span Adjustment in Manual Mode Increase or decrease the individual values of both the maximum temperature and the minimum temperature while remaining the same temperature range.

  • Page 49: Adjust Digital Zoom

    Handheld Thermal Camera User Manual Figure 3-4 Level or Span Adjustment 5. Press to confirm. Note In Manual level & span mode, press on the left side of temperature scale to quickly adjust the temperature range. 3.6 Adjust Digital Zoom In the live view interface, press to enter the digital zoom setting interface.
  • Page 50 Handheld Thermal Camera User Manual Time and Date Device time and date. Parameters Temperature measurement parameters, for example, target emissivity, temperature unit, etc. Brand Logo The brand logo is a manufacturer logo displayed on the upper right corner of the screen. You can turn it off if not needed.

  • Page 51: Chapter 4 Temperature Measurement

    Handheld Thermal Camera User Manual Chapter 4 Temperature Measurement The temperature measurement function provides the real-time temperature of the scene and display it on the left of your screen. When reading the measurement results, you may sometimes find certain signs, for example, "~", displaying in front of the values.

  • Page 52: Set Unit

    Handheld Thermal Camera User Manual Select a temperature measurement range according to the temperature of your targets. If you are testing a target of unknown temperature range or targets of different supported ranges, it is recommended to set it as Auto Switch and the device will switch from the ranges automatically.

  • Page 53: Set Image Measurement

    Handheld Thermal Camera User Manual Before You Start Select Auto in level & span. Steps 1. Go to Settings > Capture Settings > Color Distribution . 2. Select a color distribution mode. - Linear: Linear mode is used to detect small high temperature targets in low temperature background.
  • Page 54 Handheld Thermal Camera User Manual Table 4-2 Icon Description Icon Description Center spot of the scene (screen center). The temperature is displayed as Cen XX. Hot spot in the scene, which changes as the temperature or the scene changes. The temperature is displayed as Max XX. Cold spot in the scene, which changes as the temperature or the scene changes.

  • Page 55: Set Measurement Tool

    Handheld Thermal Camera User Manual 4.3 Set Measurement Tool You can set temperature measurement parameters to improve the accuracy of temperature measurement. Before You Start Set parameters such as Humidity, External Optics Transmittance and Reflection Set Measurement Parameters . Temperature. For detailed explanations, see Steps 1.

  • Page 56: Measure By Line

    Handheld Thermal Camera User Manual 3. Move the spot with the navigation buttons, or tap on the touch-screen to select a spot and move it. 4. Tap to modify temperature measurement parameters. Emissivity Set the emissivity of your target. Distance Set the distance between the target and the device.

  • Page 57: Measure By Rectangle

    Handheld Thermal Camera User Manual 4. Adjust the length of the line. - Tap the end of the line, and press navigation buttons to extend or shorten the line. - Tap and drag the end of the line to extend or shorten it. 5.

  • Page 58: Measure By Circle

    Handheld Thermal Camera User Manual Set the emissivity of your target. Distance Set the distance between the target and the device. Max./Min./Average Temperature Tap to enable the temperature types to display. The max. temperature, min. temperature, and average temperature of the rectangle area can be displayed on the left of the screen.

  • Page 59: Measure Δt And Δt Alarm

    Handheld Thermal Camera User Manual Distance Set the distance between the target and the device. Max./Min./Average Temperature Tap to enable the temperature types to display. The max. temperature, min. temperature, and average temperature of the circle area can be displayed on the left of the screen.

  • Page 60: Temperature Alarm

    Handheld Thermal Camera User Manual Note You can compare the temperature difference between different or the same measurement tools, between a measurement tool and a number, etc. If you select Number as a compared object, input the value manually. 3)Set Alarming ΔT. When the detected ΔT is greater than the set alarming ΔT, device triggers alarms.

  • Page 61: Clear All Measurements

    Handheld Thermal Camera User Manual Note Supported alarm linkages vary on different models. See the actual device for available options. Alarm Threshold When the tested temperature exceeds the threshold, the device sends alarm notification to the client software. It beeps if the audible warning is enabled. The rectangle flashes red if the rectangle tool is configured.

  • Page 62: Chapter 5 Condensation Alarm

    Handheld Thermal Camera User Manual Chapter 5 Condensation Alarm Condensation alarm marks the surface where the relative humidity exceeds the set threshold. Steps 1. Select Palettes from the main menu. 2. Tap on 3. Set ambient temperature, air relative humidity and humidity threshold for the alarm. Threshold The surface humidity threshold.

  • Page 63: Chapter 6 Route Inspection

    The PC should support WLAN function. Steps 1. Open HIKMICRO Inspector. 2. Create inspect points and routes. See the user manual of HIKMICRO Inspector for instructions. 3. Connect your device and PC to the same LAN. Available methods as below: - Connect your PC and your device to the same Wi-Fi network.

  • Page 64: Perform Route Inspection

    Connect the device to the PC client, and make sure that your device has received ● inspection tasks from the PC client. See the user manual of HIKMICRO Inspector for instructions of applying inspection task to the device. Use HIKMICRO Inspector v1.2.0.100 or newer versions to acquire full product functionality.
  • Page 65 Handheld Thermal Camera User Manual Figure 6-2 Inspection Task List 3. Select a task and press to switch to the task. Note The font of task in progress is blue on the list. 4. Browse the inspect points and check the inspection requirements for each point. 1)Press to enter the task interface.
  • Page 66 What to do next You can delete inspection tasks by selecting a task and tapping ● Upload the results to the PC client after finishing the route inspection. See the user ● manual of HIKMICRO Inspector for instructions.

  • Page 67: Upload Inspection Result And View Report

    The task status is shown in Completion. 4. Click on a finished task name to show result details. Figure 6-5 Inspection Results 5. Optional: Check a task or the desired inspect points and click Report for further analysis and report generation in HIKMICRO Analyzer.
  • Page 68 HIKMICRO Analyzer should be installed in your PC. Go to ● www.hikmicrotech.com/en/industrial-products/hikmicro-analyzer-software/ to download the software and obtain more instructions. Please keep HIKMICRO Analyzer up-to-date for the best compatibility and user ● experience. Figure 6-6 Analysis in HIKMICRO Analyzer...

  • Page 69: Chapter 7 Picture And Video

    Handheld Thermal Camera User Manual Chapter 7 Picture and Video Insert memory card into the device, and then you can record videos, capture images, and mark and save important data. Note Device does not support capturing or recording when the menu is shown. ●...
  • Page 70 Handheld Thermal Camera User Manual Figure 7-1 Editing Image Before Saving Table 7-1 Editing Options Descriptions Text Note Select text note and enter the editing page. Tap on screen to input content and press to save. Voice Note a. Select voice note and enter voice recording page. b.
  • Page 71 Handheld Thermal Camera User Manual Descriptions d. Press OK to save captured visual images to the local album. e. Repeat step 3 and step 4 to add the next two pictures. Note No more than 3 pictures are supported. The number of visual images will be displayed on the top of the Picture Note interface during taking the pictures.

  • Page 72: Record Video

    1. Optional: Adjust video type and frame rate. Table 7-3 Video Type and Frame Rate Parameter Description Video Type Radiometric Video Radiometric data is attached in videos of this format. They can only be played and further analyzed with HIKMICRO Analyzer.
  • Page 73 Recorded videos are saved in .mp4 format. These video clips can be played on local device, and any player that support this format. HIKMICRO Analyzer does not support playing this video format.. Frame Rate Higher frame rate offers a smoother video with more details for watching especially when motion occurs.

  • Page 74: View And Manage Local Files

    Handheld Thermal Camera User Manual 7.3 View and Manage Local Files Device captured images and videos are saved in local albums. You can create, delete, rename and set an album as the default saving album. For files, operations, such as browsing, moving and deleting, are available.

  • Page 75: Edit Images

    File of this format can not be played on your Video device. The file extension is determined by the frame rate of a video. Use HIKMICRO Analyzer to play and analyze the file. Please upgrade the software to the latest version, otherwise the .hrv file may not be supported.
  • Page 76 Handheld Thermal Camera User Manual Steps 1. In live view, press to enter albums. Note In live view, press to call the main menu, and select to enter albums. 2. Select an album and press 3. Select an image file and press to call the editing menu.

  • Page 77: Export Files

    Delete, move or transmit the file. Note The notes can be read and viewed during thermal image analyzing in HIKMICRO Analyzer. 7.4 Export Files 7.4.1 Export Files to PC Connect the device to your PC with supplied cable, you can export the recorded videos, captured snapshots, etc.

  • Page 78: Export Files To Hikmicro Viewer

    See the 7.4.2 Export Files to HIKMICRO Viewer Before You Start Download and install HIKMICRO Viewer on your phone, and connect the device to the APP. Connect Device via Wi-Fi , Connect Device via Hotspot . Steps 1. Open HIKMICRO Viewer .

  • Page 79: Import And Manage Tag Note Templates

    Before You Start Tag note templates are generated on the client software HIKMICRO Analyzer. Copy the templates of json format to the storage of your device, then you can use and manage the templates.

  • Page 80: Chapter 8 Calculate Area Size

    Handheld Thermal Camera User Manual Chapter 8 Calculate Area Size The device can calculate the size of rectangles and show results on screen. Steps 1. Go to Settings > Temp Measurement Settings > Area Size Calculation . 2. Enable Area Size Calculation. 3.

  • Page 81: Chapter 9 Distance Detection

    Handheld Thermal Camera User Manual Chapter 9 Distance Detection The laser range finder consists of a laser transmitter and a laser receiver. The device detects the distance to a target by measuring the time it takes for a laser pulse to reach the target and return to the laser receiver.

  • Page 82: Chapter 10 Geographic Location Display

    In an outdoor space, wait for a moment for the device to display its location. ● The location information is also attached in captured radiometric images. You can read ● the location by HIKMICRO Analyzer. Location display is only supported by models with satellite positioning modules. ●...

  • Page 83: Chapter 11 Direction Display

    Magnetic Declination Correction for instructions. Note The direction information is also attached in captured radiometric images. You can read the direction by HIKMICRO Analyzer. 11.1 Calibrate Compass Compass calibration is a must for correct direction display. You need to calibrate the compass when you enable the function for the first time.

  • Page 84: Magnetic Declination Correction

    Handheld Thermal Camera User Manual Note During calibration, keep moving and rotating the device to make sure that the device faces every possible directions. 3. Stop moving the device when calibration success message pops up. Result The status bar in the live view interface shows after successful calibration.

  • Page 85: Chapter 12 Connect Device To Software Clients

    USB cable or network, conducting live view castscreen, snapshot capturing or video recording on HIKMICRO Analyzer. 12.1 Connect Device via Wi-Fi Before You Start Scan the QR code below to download and install HIKMICRO Viewer on your phone. Android...

  • Page 86: Connect Device Via Hotspot

    5. Connect your phone to the Wi-Fi network that the device is in. 6. Open HIKMICRO Viewer, and tap + > Add Device > Connect to add the device. 7. Optional: Scan the Wi-Fi QR code to add the device.
  • Page 87 Handheld Thermal Camera User Manual Android Steps 1. Enter hotspot configuration interface. Choose from the following ways. - Tap and hold from the swipe-down menu. - Go to Settings > Connections > Hotspot . 2. Tap to enable hotspot function. Figure 12-2 Set Hotspot A QR code displays in the setting interface.

  • Page 88: Cast Screen To Pc

    Handheld Thermal Camera User Manual 4. Open HIKMICRO Viewer, and tap + > Add Device > Connect to add the device . 5. Optional: Scan the hotspot QR code to add the device. 1)Turn on the device hotspot, and a QR code will pop up.

  • Page 89: Cast Device Screen To Pc Via Usb Cable

    You can connect the device to your PC via a supplied USB cable to start live view, taking snapshots, recording, etc. Before You Start Download and install the latest version of HIKMICRO Analyzer on your PC. Please visit our website or contact technical support or customer service teams for installation packages. Steps 1.

  • Page 90: Chapter 13 Pair Bluetooth Devices

    Handheld Thermal Camera User Manual Chapter 13 Pair Bluetooth Devices Pair your camera with an external Bluetooth player (speaker or headsets) to play the audio recorded together with the videos and the images. Besides, pair your camera with mobile phones with Android system to export captured images to the phone. Before You Start Make sure the external Bluetooth device is in discoverable mode.

  • Page 91: Chapter 14 Set Led Light

    Handheld Thermal Camera User Manual Chapter 14 Set LED Light Press in live view to turn on/off the LED light. Or tap in the swipe-down menu to quickly turn on/off LED light.

  • Page 92: Chapter 15 Image Local Output

    Handheld Thermal Camera User Manual Chapter 15 Image Local Output You can view the image on the display unit for details with this function. Before You Start This function is only supported by the models with CVBS out interface or micro HDMI ●...

  • Page 93: Chapter 16 Maintenance

    Connect Device via Wi-Fi , . 1. Connect the device to HIKMICRO Viewer. See 2. Open HIKMICRO Viewer. 3. Tap Device Upgrade > Check for Updates in the home screen of HIKMICRO Viewer. 16.3.2 Upgrade Device by Upgrade File Before You Start http://www.hikmicrotech.com...

  • Page 94: Restore Device

    Handheld Thermal Camera User Manual 2. Select USB Mode to USB Drive in device pop-up window. Your device is detected and displayed as a disk in your PC. 3. Unzip the file, and copy the upgrade file and paste it to the root directory of the device. 4.

  • Page 95: Chapter 17 Appendix

    Handheld Thermal Camera User Manual Chapter 17 Appendix 17.1 FAQ Scan the following QR code to get device common FAQ.
  • Page 96 UD40476B...

This manual is also suitable for:

Gx1 series

Table of Contents