Subscribe to Our Youtube Channel
Related Manuals for Kraus KPF-3126
Summary of Contents for Kraus KPF-3126
- Page 1 User Manual of Product 1: Kraus KPF-1610MB Bolden 18-Inch Commercial Kitchen Faucet with Dual Function Pull-Down Sprayhead in all-Brite Finish, 18 inch, Matte Black User Manual of Product 2: Kraus KAG-1MB Dishwasher Air Gap, Matte Black...
- Page 2 INSTALLATION MANUAL Industrial Pull Down Kitchen Faucet KPF-3126 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2023 Kraus USA Plumbing LLC I REV. March 31, 2023...
- Page 3 Congratulations on the purchase of your new Kraus plumbing fixture! Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance or have any problems with your product: STOP DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com...
-
Page 4: Prior To Installation
Prior to Installation: · Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement. · Read all instructions and safety warnings and ensure you have all tools, parts, and equipment necessary for a safe installation. - Page 5 3A. Rubber Washer 3B. Metal Washer 3C. Mounting Nut 3D. Mounting Screws Waterlines Quick Connector Weight For technical assistance or replacement parts, please contact Kraus Customer Service and one of our representatives will be happy to help: Toll-Free: 800-775-0703 or Customerservice@kraususa.com...
- Page 6 Faucet Dimensions 10 5/8" 5" (270mm) (126mm) 9" (228.6mm) Ø 1 1/2" Ø 2 1/8" (37mm) (54mm) Installer Tip: Shut off main water supply before installing new faucet.
- Page 7 Step 1. Remove mounting hardware Remove the mounting screws (3D), mounting nut (3C), metal washer (3B) and rubber washer (3A) from the mounting pipe. Step 2. Install faucet and mounting hardware Insert faucet body (2) into hole in countertop or deck plate assembly.
- Page 8 Step 3. Secure mounting hardware Adjust direction of faucet body (2) so that handle is on right side of faucet. Tighten mounting nut (3C) until snug. Tighten mounting screws (3D) to nut with Phillips screwdriver until snug. Step 4. Attach spray hose and counterweight Connect spray hose to quick connector (5) attached to supply line.
- Page 9 Step 5. Connect waterlines Connect hot and cold copper lines (4) to angle stops. Tighten both ends of waterlines with a wrench until snug. Turn on hot and cold angle stops and check for leaks. NOTE: Please make sure filter washers are installed before connecting to the main valve.
- Page 10 Step 7. Check for leaks Check for leaks at the connections. Retighten if necessary .
- Page 11 Maintenance - Cartridge Replacement Step 1: Remove the handle button by hand. Loosen the screw with a Phillips screwdriver. Remove the handle and cartridge cap by hand. Step 2: Unscrew the locking nut with an adjustable wrench. Remove ceramic disc cartridge.
-
Page 12: Replacement Parts
Replacement Parts Replacement Parts List Finish/Color Part # KP44097 1. Spray Head CH, SFS, MB, BG, SB** KP44096 2. Spray Hose BLBG, GRCH, BLMB, BLSB, GRSFS* 3. Handle Button CH, SFS, MB, BG, SB** KP44032 4. Metal Handle KP44103 CH, SFS, MB, BG, SB** 5. -
Page 13: Troubleshooting
Troubleshooting If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps: PROBLEM CAUSE ACTION Leakage under faucet handle Locking nut has come loose or Loosen set screw with Phillips screwdriver. cartridge needs to be reseated. - Page 14 Kraus warrants the structure and finish of the Faucet to be free from defects in material and workmanship under normal usage for as long as the original purchaser resides in the residence in which the Faucet was first installed.
- Page 15 12 Harbor Park Drive Port Washington, NY 11050 Toll-free 800-775-0703 Customerservice@kraususa.com If you are a plumbing contractor or trade professional, please contact a Kraus Pro Representative at: Kraus USA Plumbing, LLC 12 Harbor Park Drive Port Washington, NY 11050 516-801-8955 Proservice@kraususa.com...
- Page 16 IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration www.kraususa.com...
- Page 17 INSTALLATION GUIDE Air Gap KAG-1 KAG-2 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2022 Kraus USA Plumbing LLC I REV. NOV 22, 2022...
- Page 18 Congratulations on the purchase of your new Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance, or have any problems with your product: DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com Have the model number available, and retain a copy of your receipt...
- Page 19 Toll-Free: 800.775.0703 or customerservice@kraususa.com The step-by-step guidelines in the installation instructions are a general reference for installing Kraus Accessory. Should there be any discrepancies, Kraus cannot be held liable. It is recommended to install all Kraus products by hiring a licensed professional.
- Page 20 Diagram and Parts List: A. Cap B. Nut & Washer C. Washer D. Nut D. Air Gap Body...
- Page 21 Dimension 1 7/8” 1 7/8“ [46.3mm] [46.3mm]...
- Page 22 Step 1 Remove the cap (A) and nut & washer (B). A & B Step 2 Insert the air gap body (E) through the sink deck hole, leaving 2-1/4" (57 mm) approximately 2-1/4" (57 mm) of the body showing above sink deck. (Twist the nut (D) down counterclockwise if necessary).
- Page 23 Step 3 Thread the cap (A) and the nut & washer (B) fully onto body, with the slotted vents (1) facing the A & B wall. Tighten the nut (D) firmly from the (F/L) underside of the sink. Note: The air gap is to be installed so that the flood level mark (F/L) shall be at or above the flood level of the sink or other receptacle which may be connected to the sanitary drain into...
- Page 24 Replacement Parts Replacement Parts List Finish / Color Part # KP27179 CH, SFS, MB, (For KAG-1) 1. Cap ORB, BG, SB, BB, KP27180 SFBG,SFSB* (For KAG-2) 2. Nut & Washer KP27192 3. Washer KP27182 4. Nut KP27181 *Denotes faucet component color options: CH - Polished Chrome SFS - Spot Free Stainless Steel MB - Matte Black...
- Page 25 (1) year from the date of purchase. Any product reported to the authorized dealer or to Kraus as being defective within the warranty period will be repaired or replaced with a product of equal value at the option of Kraus.
- Page 26 TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS WARRANTY DOES NOT COVER, AND KRAUS USA PLUMBING, LLC SHALL NOT BE LIABLE FOR, ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING LABOR CHARGES TO REPAIR, REPLACE, INSTALL OR REMOVE THIS PRODUCT), WHETHER ARISING OUT OF BREACH OF ANY EXPRESS OR IMPLIED WARRANTY, BREACH OF CONTRACT, TORT, OR OTHERWISE.
- Page 27 IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration...
Need help?
Do you have a question about the KPF-3126 and is the answer not in the manual?
Questions and answers