Page 3
Thank you for your purchase We would like to take this opportunity to thank you for choosing Kraus. We hope that you are completely satisfied with your purchase, and enjoy it for years to come. If you have any questions, or require technical assistance, please contact us at 800.775.0703 and one of our representatives will be happy to help.
Toll-Free: 800-775-0703 or Customerservice@kraususa.com The step-by-step guidelines in the installation instructions are a general reference for installing a Kraus Sink. Should there be any discrepancies, Kraus cannot be held liable. It is recommended to install all Kraus products by hiring a licensed professional.
Putty Knife Tape Measure Pencil Scissors Screwdriver NOTE: Specialized tools may be necessary to install Kraus Stainless Steel Undermount sinks with countertop materials other than wood, marble, or granite Parts List • Cut-Out Template • Mounting Hardware • Bottom Grids •...
Page 6
Dimensions 13" 17" 14-1/2" 18-1/2" 95° 95° KHU15 & KHU15C KHU19 & KHU19C 14.5” x 18.5” x 10” 18.5” x 18.5” x 10” Min Cabinet Size: 18” Min Cabinet Size: 24” Drain Model #: ST-3 Drain Model #: ST-3 Optional Drain#: GDA-1 Optional Drain#: GDA-1 22-1/2"...
Page 7
27" 30" 28-1/2" 31-1/2" 95° 95° KHU29 & KHU29C KHU32 & KHU32C 28.5” x 18.5” x 10” 31.5” x 18.5” x 10” Min Cabinet Size: 33” Min Cabinet Size: 36” Matching Grid: KBG-H29 Matching Grid: KBG-H32 Drain Model #: ST-3 Drain Model #: ST-3 Optional Drain#: GDA-1 Optional Drain#: GDA-1...
Page 9
Step1 2. Position Template • Check the cut-out template against the actual sink to ensure a proper sized cut-out • Place the cut-out template in the desired location on the countertop NOTE: Make sure clearance is suitable for backsplash, faucet, and plumbing for the sink...
Page 10
Step2 3. Trace Template • Trace template on countertop with a pencil...
Page 11
Step3 4. Cut Countertop • Cut the opening in the countertop by carefully following the traced line Step3 Please use the appropriate saw that best fits your countertop NOTE: Step4 material Determine location for mounting brackets; space 1/2" (13mm)
Page 12
Determine location for mounting brackets; space 5. Set up Mounting Brackets 3/8”POSITIVE 1/8”NEGATIVE • Turn countertop over and align sink with countertop. Decide location for mounting brackets Centerline • Mounting holes should be ½” from edge of sink Step5 Step6 1/2"...
Page 13
Step6 7. Install Anchors • Insert anchors into drilled holes and lightly tap with a hammer until flush Step7 8. Secure Sink to Countertop • Use a bead of silicone (or preferred adhesive) around the rim of the sink. Check the alignment of the sink to the cutout in the countertop. Place sink over cutout hole and press firmly...
9. Attach Mounting Hardware Step8 • Attach mounting hardware to secure bowl. Remove excess sealant from inside lip • Allow sealant to set for 30 – 60 minutes Use acetone or rubbing alcohol to remove any excess sealant NOTE:...
Page 15
Step9 10. Install Plumbing Fixtures • Connect drain to sink. Connect trap to drain. Connect water supply connections to faucet according to manufacturer’s instructions • Run water into sink and check for leaks...
Page 16
Our customer service hours are Monday – Friday, 9am – 8pm EST. Be sure to visit our website at www.kraususa.com If you are a HOMEOWNER please contact a Kraus Customer Service Representative at: Kraus USA, Inc. 12 Harbor Park Drive...
Page 17
Please take a moment to share your experience. Visit http://www.kraususa.com/review to let us know what you think about your new Kraus product. Contact Us to Learn More 1.800.775.0703 / www.kraususa.com / customerservice@kraususa.com Like & Follow KrausUSA Download the Kraus Care & Maintenance Guide at: http://www.kraususa.com/maintenance www.kraususa.com...
Page 19
Congratulations on the purchase of your new Kraus plumbing fixture! Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance or have any problems with your product: STOP DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com...
Prior to Installation: · Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement. · Read all instructions and safety warnings and ensure you have all tools, parts, and equipment necessary for a safe installation.
Page 21
3A. Rubber Washer 3B. Metal Washer 3C. Mounting Nut 3D. Mounting Screws Waterlines Quick Connector Weight For technical assistance or replacement parts, please contact Kraus Customer Service and one of our representatives will be happy to help: Toll-Free: 800-775-0703 or Customerservice@kraususa.com...
Page 22
Faucet Dimensions 10 5/8" 5" (270mm) (126mm) 9" (228.6mm) Ø 1 1/2" Ø 2 1/8" (37mm) (54mm) Installer Tip: Shut off main water supply before installing new faucet.
Page 23
Step 1. Remove mounting hardware Remove the mounting screws (3D), mounting nut (3C), metal washer (3B) and rubber washer (3A) from the mounting pipe. Step 2. Install faucet and mounting hardware Insert faucet body (2) into hole in countertop or deck plate assembly.
Page 24
Step 3. Secure mounting hardware Adjust direction of faucet body (2) so that handle is on right side of faucet. Tighten mounting nut (3C) until snug. Tighten mounting screws (3D) to nut with Phillips screwdriver until snug. Step 4. Attach spray hose and counterweight Connect spray hose to quick connector (5) attached to supply line.
Page 25
Step 5. Connect waterlines Connect hot and cold copper lines (4) to angle stops. Tighten both ends of waterlines with a wrench until snug. Turn on hot and cold angle stops and check for leaks. NOTE: Please make sure filter washers are installed before connecting to the main valve.
Page 26
Step 7. Check for leaks Check for leaks at the connections. Retighten if necessary .
Page 27
Maintenance - Cartridge Replacement Step 1: Remove the handle button by hand. Loosen the screw with a Phillips screwdriver. Remove the handle and cartridge cap by hand. Step 2: Unscrew the locking nut with an adjustable wrench. Remove ceramic disc cartridge.
Troubleshooting If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps: PROBLEM CAUSE ACTION Leakage under faucet handle Locking nut has come loose or Loosen set screw with Phillips screwdriver. cartridge needs to be reseated.
Page 30
Kraus warrants the structure and finish of the Faucet to be free from defects in material and workmanship under normal usage for as long as the original purchaser resides in the residence in which the Faucet was first installed.
Page 31
12 Harbor Park Drive Port Washington, NY 11050 Toll-free 800-775-0703 Customerservice@kraususa.com If you are a plumbing contractor or trade professional, please contact a Kraus Pro Representative at: Kraus USA Plumbing, LLC 12 Harbor Park Drive Port Washington, NY 11050 516-801-8955 Proservice@kraususa.com...
Page 32
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration www.kraususa.com...
Need help?
Do you have a question about the Pax Series and is the answer not in the manual?
Questions and answers