Device Self-Check - Elegoo Mars 5 Ultra User Manual

Device Self-Check

Note: Upon startup, the printer conducts a self-check on key hardware components to prevent any printing
failures due to hardware malfunctions. Please refer to the error prompts on the machine to troubleshoot the
printer. Do not touch the printer during the self-check process.
When the accumulated usage of the release film is approaching 60,000 times, the device will issue a
reminder to replace the release film promptly. Click the refresh button on the device self-check page to
reset the counter manually.
Accumulated release film usage
Check device prompts for printer status
Re-detection
(See Picture 2)
(See Picture 1)
09
(Picture1)
(Picture2)