GeoVision GV-ABL Series Quick Start Manual
Hide thumbs
Also See for GV-ABL Series:
- User manual (224 pages) ,
- Quick start manual (61 pages) ,
- User manual (234 pages)
Table of Contents
Advertisement
Quick Links
GV-ABL / TBL Series
GV-ADR / TDR Series
GV-AVD / TVD Series
GV-BLFC5800
GV-EBD Series
GV-EBDP / TBLP Series
GV-EBFC5800
GV-FER5702
GV-PTZ5810-IR
GV-TFD Series
GV-TMS Series
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
Quick Start Guide
GV-IP Camera
UBN-QG-ZH
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for GeoVision GV-ABL Series
Summary of Contents for GeoVision GV-ABL Series
- Page 1 Quick Start Guide GV-IP Camera GV-ABL / TBL Series GV-ADR / TDR Series GV-AVD / TVD Series GV-BLFC5800 GV-EBD Series GV-EBDP / TBLP Series GV-EBFC5800 GV-FER5702 GV-PTZ5810-IR GV-TFD Series GV-TMS Series Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. UBN-QG-ZH...
- Page 2 GeoVision. Every effort has been made to ensure that the information in this manual is accurate. GeoVision, Inc. makes no expressed or implied warranty of any kind and assumes no responsibility for errors or omissions. No liability is assumed for incidental or consequential damages arising from the use of the information or products contained herein.
-
Page 3: Table Of Contents
Contents Note for Connecting to GV-VMS / DVR / NVR ................iii Note for Installing Camera Outdoor ..................... iii Note for Powering the Camera ...................... iii Note for Face Detection ......................... iv Note for People Counting ....................... v 1. GV-EBD / EBFC / EBDP Series ....................1 1.1 Packing List .......................... - Page 4 5. GV-TFD Series ........................37 5.1 Packing List ........................37 5.1.1 GV-TFD4700 / 4800 ........................... 37 5.2 Overview ..........................38 5.2.1 GV-TFD4700 / 4800 ........................... 38 5.3 Installation .......................... 39 5.3.1 GV-TFD4700 / 4800 ........................... 39 6. GV-FER5702 ..........................40 6.1 Packing List ........................
-
Page 5: Note For Connecting To Gv-Vms / Dvr / Nvr
Note for Connecting to GV-VMS / DVR / NVR The GV-IPCAM is designed to work with and record on GV-VMS / DVR / NVR, a video management system. • Once the camera is connected to the GV-VMS / DVR / NVR, the resolution set on the GV-VMS / DVR / NVR will override the resolution set on the camera’s Web interface. -
Page 6: Note For Face Detection
Note for Face Detection To use the camera’s built-in face detection feature (see 3.6.1.7 Face Detection in the User’s Manual), which is only supported by certain models, it is recommended to install the camera according to the criteria listed below Surveillance Condition •... -
Page 7: Note For People Counting
Note for People Counting To use the camera’s built-in people counting feature (see 3.6.1.8 People Counting in the User’s Manual), which is only supported by certain models, it is recommended to install the camera according to the criteria listed below: Surveillance Condition •... -
Page 8: Gv-Ebd / Ebfc / Ebdp Series
1. GV-EBD / EBFC / EBDP Series Camera Type Model No. GV-EBD2702 (IP67) GV-EBD2704 (IP67) GV-EBD2705 (IP67) GV-EBD4700 (IP67) GV-EBD4701 (IP67) GV-EBD4704 (IP67) GV-EBD4711 (IP67) GV-EBD4712 (IP67) Eyeball IP Dome GV-EBD4813 (IP67) GV-EBD8700 (IP67) GV-EBD8711 (IP67) GV-EBD8800 (IP67) GV-EBD8813 (IP67) GV-EBDP5800 (IP67) GV-EBDP8800 (IP67) GV-EBFC5800 (IP67) -
Page 9: Packing List
1.1 Packing List The packing list varies depending on the model. Product details can be found on the datasheet. Eyeball Dome • Screw Kit Drill Template Paster • • Waterproof Rubber Set Download Guide • • Torx Wrench (not available for all models) •... -
Page 10: Overview
GV-EBD Series 1.2 Overview 1.2.1 GV-EBD2702 / 2704 / 2705 / 4700 / 4701 / 4704 / 8700 / 8800 and GV-EBFC5800 Description Bottom ring Housing Lens Infrared indicator / Warm LEDs (GV-EBFC5800 only) Power connector (DC 12 V) Ethernet connector / PoE Micro SD card slot (GV-EBD2704 / 4701 / 4704 / 8800 and GV-EBFC5800 only) Microphone (GV-EBD2704 / 4701 / 4704 / 8800 and... -
Page 11: Gv-Ebd4711 / 4712 / 4813 / 8711 / 8813, Gv-Ebdp5800 / 8800
1.2.2 GV-EBD4711 / 4712 / 4813 / 8711 / 8813, GV-EBDP5800 / 8800 Description Bottom ring Housing Microphone Lens Power connector (DC 12 V) Ethernet connector / PoE Micro SD card slot and default button compartment Default button Micro SD card slot Note: If the default button doesn’t respond after pressing for 15 seconds, reboot the camera and try again within 10 minutes of rebooting. -
Page 12: Installation
GV-EBD Series 1.3 Installation The Target Eyeball Dome is designed for outdoors. With the standard package, you can install the camera on the ceiling. Or you can purchase optional mounting accessories to mount the dome on a wall. Below are the instructions for Ceiling Mount. There are two kinds of Ceiling Mount: Concealed Installation and Open Installation. - Page 13 3. Remove the bottom ring by turning it anticlockwise. Bottom Ring 4. Connect the cables and secure the camera. Connect the cables and protect them with waterproof tape Attach the camera to ceiling with screws 5. Adjust the monitoring direction. The camera can rotate 360 degrees horizontally The lens can rotate 80...
- Page 14 GV-EBD Series 6. Mount the bottom ring. Push the bottom ring back up and turn it clockwise to lock into position For Open Installation Lead the cables out from the open slot on the bottom ring before screwing the camera to the ceiling as shown in step 4 of Conceal Installation.
-
Page 15: Gv-Ebd4711 / 4712 / 4813 / 8711 / 8813, Gv-Ebdp5800 / 8800 Installation
1.3.2 GV-EBD4711 / 4712 / 4813 / 8711 / 8813, GV-EBDP5800 / 8800 Installation For Concealed Installation Stick the drill template paster to the ceiling and drill three holes according to the drill template. Drill Template Paster Insert the screw anchors. Drill a hole to lead the cables out of the ceiling Knock in screw anchors... - Page 16 GV-EBD Series Loosen the fixing screw and remove the housing by turning it to the position as shown. Secure the bottom ring to the ceiling with 3 supplied screws and connect the cable. Connect cable and protect it with waterproof tape (Optional) insert a Attach bottom ring to micro SD card...
- Page 17 Adjust the monitoring direction. Then tighten the screw. For Open Installation Lead the cables out from the open slot on the bottom ring before screwing the camera to the ceiling as shown in step 5 of Concealed Installation. Open slot on the bottom ring Note: You can optionally purchase GV-Mount211 or GV-Mount212 for Wall Bracket Mount.
-
Page 18: Gv-Abl / Blfc / Tbl / Tblp Series
2. GV-ABL / BLFC / TBL / TBLP Series Camera Type Model No. GV-ABL2701 Series (IP66) GV-ABL2702 (IP67 + IK10) GV-ABL2703 Series (IP67) GV-ABL4701 Series (IP66) GV-ABL4703 (IP67) Bullet IP Camera GV-ABL4711 (IP67 + IK10) GV-ABL4712 (IP67) GV-ABL8712 (IP67 + IK10) GV-TBL2703 Series (IP67) GV-TBL2705 (IP67) GV-TBL2706 Series (IP67) -
Page 19: Packing List
2.1 Packing List The packing list varies depending on the model. Product details can be found on the datasheet. Bullet IP Camera Waterproof Rubber Set • • Screw Kit Drill Template Paster • • Download Guide Torx Wrench (not available for all models) •... -
Page 20: Overview
GV-ABL Series 2.2 Overview 2.2.1 GV-ABL2701 / 2703 / 4701 / 4703 & TBL2703 / 2705 / 2706 / 2718 / 4703 / 4705 / 8804, TBLP5800 / 8800 Description Power connector (DC 12 V) Ethernet connector / PoE No. Description No. - Page 21 GV-TBL8804 GV-TBL2705 / 2706 / 4705 GV-TBL4807 GV-TBLP5800 GV-TBL2718 No. Description Description Default button / SD card slot Built-in microphone x 2 (GV-TBL4807) Built-in speaker (GV-TBL8804) IR LED x 4 (GV-TBL4807) IR LED x 2 (GV-TBLP5800 / 8800) Built-in microphone (GV-TBL8804) Built-in microphone (GV-TBLP5800 / 8800) Built-in microphone (GV-TBLP5800 /...
- Page 22 GV-ABL Series Note: 1. The Default button is only available in the following models: GV-ABL2703 / 4703, GV-TBL2703 series / 2718 / 4703 / 4807 / 8804, and GV-TBLP5800 / 8800. 2. If the Default button doesn’t respond after pressing for 15 seconds, reboot the camera and try again within 10 minutes of rebooting.
-
Page 23: Blfc5800
2.2.2 GV-ABL2702 / 4711 / 4712 / 8712, TBL4700 / 4710 / 4711 / 4807 / 4810 / 8710 / 8810, and BLFC5800 Description Power connector (DC 12 V) Audio input / output / GND Alarm input (IN, GND) / output (N, P) Ethernet connector / PoE Video Output (GV-ABL8712 / TBL8710 Only) Note: GV-TBL4807 does not have the terminal blocks for audio input / output (No. -
Page 24: Installation
GV-ABL Series 2.3 Installation The Bullet IP Camera is designed for outdoors. With the standard package, you can install the camera on the wall or ceiling. Or, you can purchase optional mounting accessories to mount your camera on a wall. - Page 25 Lead the cables across the hole on the wall. Drill the holes according to the drill template. Insert the screw anchors.
- Page 26 GV-ABL Series Screw the locknut and loosen the universal joint before attaching the camera to the wall. Secure the camera to the wall and connect all cables. To adjust the monitoring direction: GV-ABL2702 / 4711 / 4712 / 8712, TBL2705 / 2706 / 4700 / 4705 / 4710 / 4711 /...
- Page 27 GV-TBL8804 and GV-TBLP5800 / 8800 For Open Installation Lead the cables out from the open slot on the base before screwing the camera to the wall as shown in step 6 in For Concealed Installation.
-
Page 28: Gv-Adr / Tdr Series
3. GV-ADR / TDR Series Camera Type Model No. GV-ADR2701 (IP66) GV-ADR2702 (IP67 + IK10) GV-ADR4701 (IP66 + IK10) GV-ADR4702 (IP67 + IK10) GV-TDR2700 Series (IP67 + IK10) GV-TDR2702 (IP67 + IK10) GV-TDR2704 Series (IP67 + IK10) Mini Fixed Rugged IP Dome GV-TDR2705 (IP67 + IK10) GV-TDR4700 Series (IP67 + IK10) GV-TDR4702 (IP67 + IK10) -
Page 29: Packing List
3.1 Packing List The packing list varies depending on the model. Product details can be found on the datasheet. IR Mini Fixed Rugged IP Dome Waterproof Rubber Set • • Screw Kit Drill Template Paster • • Download Guide • Torx wrench (comes with some models) •... -
Page 30: Overview
GV-ADR / TDR Series 3.2 Overview Description Ethernet connector / PoE Power connector (DC 12 V) Transparent Dome Cover For GV-TDR2700 / 4700 / 4703 series / GV-TDR8805 only, see the table below. Micro SD card slot Wire Definition GV-TDR4703 series / 4803 series / GV-TDR2700 series / 4700 series GV-TDR8805 Wire... -
Page 31: Installation
3.3 Installation The IR Mini Fixed Rugged IP Dome is designed for outdoors. With the standard package, you can install the camera on the ceiling. Below are the instructions for Ceiling Mount. There are two kinds of Ceiling Mount: Concealed Installation and Open Installation. In Concealed Installation, the cables are hidden in the ceiling. - Page 32 GV-ADR / TDR Series Unscrew the transparent dome cover with the supplied torx wrench. Connect the cables and secure the camera. Adjust the monitoring direction and tighten the screws after vertically adjusting the lens.
- Page 33 Secure the transparent dome cover with the supplied torx wrench. Note: Before securing the transparent dome cover, make sure the waterproof rubber strip is tightly held by the six retainers on the bottom ring. For Open Installation Lead the cables out from the open slot on the camera base before screwing the camera to the ceiling as shown in step 4 in For Concealed Installation.
-
Page 34: Gv-Avd / Tvd Series
4. GV-AVD / TVD Series Camera Name Model No. GV-AVD2700 (IP67 + IK10) GV-AVD4710 (IP67 + IK10) GV-AVD8710 (IP67 + IK10) GV-TVD2712 (IP67 + IK10) GV-TVD4700 (IP67 + IK10) Vandal Proof IP Dome GV-TVD4710 (IP67 + IK10) GV-TVD4711 (IP66 + IK10) GV-TVD4810 (IP67 + IK10) GV-TVD4811 (IP66 + IK10) GV-TVD8710 (IP67 + IK10) -
Page 35: Packing List
4.1 Packing List 4.1.1 GV-TVD4711 / TVD4811 IR Vandal Proof IP Dome Screw Kit • • Drill Template Paster Torx Wrench • • Spare Waterproof Rubber Plug Cable Protection Connector • • 2-Pin Power Terminal Block Download Guide • •... -
Page 36: Gv-Avd / Tvd Series
GV-AVD / TVD Series 4.1.2 GV-AVD / TVD Series IR Vandal Proof IP Dome Waterproof Rubber Set • • Screw Kit Drill Template Paster • • Torx Wrench Download Guide • •... -
Page 37: Overview
4.2 Overview 4.2.1 GV-AVD2700 / 4710 / 8710, GV-TVD4700 / 4710 / 4810 / 8710 / 8810 No. Description No. Description Power connector (DC 12 V) Default button Ethernet connector / PoE Micro SD card slot Video output Default button (For GV-TVD4810 / 8810) (Not applicable to GV-TVD4700 / 8810) Audio input / Audio output / GND (Not... -
Page 38: Gv-Tvd4711 / Tvd4811
GV-AVD / TVD Series 4.2.2 GV-TVD4711 / TVD4811 No. Description No. Description Ethernet port Digital Input Power port (2-Pin terminal block) Micro SD card slot Audio In Default button Digital Output (N) Audio Out Digital Output (P) Microphone (GV-TVD4811 only) -
Page 39: Gv-Tvd2712
4.2.3 GV-TVD2712 No. Description No. Description Micro SD card slot Built-in microphone Default button Note: There are two ways to supply power to the camera: ⚫ Use a Power over Ethernet (PoE) adapter to connect the camera to the network, and the power will be provided at the same time. ⚫... -
Page 40: Installation
GV-AVD / TVD Series 4.3 Installation The Target Vandal Proof Dome is designed for outdoors. With the standard package, you can install the camera on the ceiling. Alternatively, you can purchase optional mounting accessories to mount the camera on a wall. Below are the instructions for Ceiling Mount. - Page 41 3. Unscrew the transparent dome cover with the supplied torx wrench. 4. Connect the camera cables and secure the camera. 5. Insert a SD card into the slot. 6. Adjust the monitoring direction and tighten the screws after vertically adjusting the lens.
-
Page 42: Gv-Tvd4711 / Tvd4811
GV-AVD / TVD Series 4.3.2 GV-TVD4711 / TVD4811 Follow steps 1 to 3 in 4.3.1 GV-AVD2700 / 4710 / 8710, GV-TVD4700 / 4710 / 4810 / 8710. To install an Ethernet / PoE cable: Remove the large waterproof rubber plug from the base of the camera. Cut a small opening on the tip of the large waterproof rubber plug. - Page 43 10. Connect the 2-pin terminal block and I/O wires to the camera. Tip: When connecting the I/O wires to the camera, thread the I/O wires through the protruded loop. To finish the installation: 11. Secure the camera and insert a micro SD card to the slot. 12.
-
Page 44: Gv-Tfd Series
5. GV-TFD Series Camera Type Model No. GV-TFD4700 Mini Fixed IP Dome GV-TFD4800 5.1 Packing List 5.1.1 GV-TFD4700 / 4800 IR Mini Fixed IP Dome Screw Kit • • 2-Pin Power Terminal Block (for GV-TFD4700 Torx Wrench • • only) Drill Template Paster •... -
Page 45: Overview
5.2 Overview 5.2.1 GV-TFD4700 / 4800 11 12 No. Description No. Description Power port (2-Pin terminal block) Audio In Ethernet port Alarm Input Default button Micro SD card slot Audio Out Alarm Output P Alarm Output N Note: There are two ways to supply power to the camera: ⚫... -
Page 46: Installation
GV-AVD / TVD Series 5.3 Installation The IR Mini Fixed IP Dome is designed for indoors. With the standard package, you can install the camera on the ceiling. Below are the instructions for Ceiling Mount. There are two kinds of Ceiling Mount: Concealed Installation and Open Installation. -
Page 47: Gv-Fer5702
6. GV-FER5702 Camera Type Model No. IR Fisheye Rugged IP Camera GV-FER5702 6.1 Packing List 6.1.1 GV-FER5702 IR Fisheye Rugged IP Camera (GV-FER5702) • Drill Template Paster • Waterproof Rubber Set Screw Kit • • Download Guide •... -
Page 48: Overview
6.2 Overview 6.2.1 GV-FER5702 No. Description No. Description Green wire-Alarm output - Power connector (DC 12V) Yellow wire-Audio output Ethernet connector / PoE White wire-GND Brown wire-Alarm input Purple wire-Audio input Blue wire-GND Orange wire-Alarm output + Load Default Button No. -
Page 49: Installation
GV-FER5702 6.3 Installation The IR Fisheye Rugged IP Camera is designed for outdoors. With the standard package, you can install the camera on the wall or ceiling. Or, you can purchase optional mounting accessories to mount your camera on a wall. Below are the instructions for Ceiling Mount. - Page 50 Remove the housing by turning it anticlockwise. Secure the camera base onto the ceiling with 3 screws supplied and lock up the housing by turning it clockwise.
-
Page 51: Gv-Ptz5810-Ir
7. GV-PTZ5810-IR Camera Type Model No. IR IP Mini PTZ Camera GV-PTZ5810-IR 7.1 Packing List 7.1.1 GV-PTZ5810-IR IR IP Mini PTZ Camera (GV-PTZ5810-IR) • Screw Kit • Download Guide • Drill Template Paster •... -
Page 52: Overview
7.2 Overview 7.2.1 GV-PTZ5810-IR No. Description No. Description Power connector (DC 12V) Orange / white wire-Alarm output_P Ethernet connector / PoE Orange wire-Alarm output_N Yellow / black wire-RS485_A Built-in microphone Yellow wire-RS485_B IR LED Purple wire-Alarm input Built-in speaker Black wire-GND Ready LED No. -
Page 53: Installation
GV-PTZ5810-IR 7.3 Installation The IR IP Mini PTZ Camera is designed for indoors. With the standard package, you can install the camera on the wall or ceiling. Or, you can purchase optional mounting accessories to mount your camera on a wall. Below are the instructions for Ceiling Mount. - Page 54 Fix the adapter plate to the ceiling with screws. Secure the camera to the adapter plate and rotate the camera counterclockwise until it’s fastened.
-
Page 55: Gv-Tms Series
8. GV-TMS Series Camera Type Model No. GV-TMS8800 Multi-Lens IR Fixed IP Dome Camera GV-TMS20811 8.1 Packing List 8.1.1 GV-TMS8800 Multi-Lens IR Fixed IP Dome Camera Drill Template Paster • • (GV-TMS8800) Screw Kit Waterproof Rubber Set • • Torx Wrench Download Guide •... -
Page 56: Gv-Tms20811
Accessing the Camera 8.1.2 GV-TMS20811 Multi-Lens IR Fixed IP Dome Camera Pendant Mount Plate • • (GV-TMS20811) Screw Kit Waterproof Rubber Set • • Torx Wrench Protective Tape • • Drill Template Paster Download Guide • •... -
Page 57: Overview
8.2 Overview 8.2.1 GV-TMS8800 Description Description Built-in microphone x 2 (on both Alarm input / output sides) Ethernet connector / PoE IR LED x 2 Power connector (DC 12V) microSD card slot Audio input / output Default button Note: If the default button doesn’t respond after pressing for 15 seconds, reboot the camera and try again within 10 minutes of rebooting. -
Page 58: Gv-Tms20811
Accessing the Camera 8.2.2 GV-TMS20811 Description Description Audio input / output Ethernet connector / PoE++ RS485 Built-in microphone x 2 Alarm output IR LED x 9 Alarm input Default button Power output microSD card slot Power input (DC 24V, 2.5A / AC 24V, 2.5A) Note: If the default button doesn’t respond after pressing for 15 seconds, reboot the camera... - Page 59 and try again within 10 minutes of rebooting. All channels (CH1–CH4) receive audio from both built-in microphones (No. 8).
-
Page 60: Installation
Accessing the Camera 8.3 Installation The camera is designed for outdoors. With the standard package, you can install the camera on the ceiling. Or, you can purchase optional mounting accessories to mount your camera on a ceiling. Below are the instructions for Ceiling Mount. 8.3.1 GV-TMS8800 Stick the drill template paster to the ceiling and drill holes on the ceiling according to the drill template. - Page 61 Adjust the horizontal shooting angle. Method 1: Rotate the tilt-shift lens and adapter ring. Method 2: Rotate the LED cover. Adjust the vertical shooting angle: Loosen the screws on the adapter ring, adjust the shooting angle, and tighten the screws. Caution: Stop rotating the lens when it reaches the limit;...
-
Page 62: Gv-Tms20811
Accessing the Camera 8.3.2 GV-TMS20811 Stick the drill template paster to the ceiling, lead the cables through the hole, and drill holes on the ceiling according to the drill template. Install the screw anchors in the ceiling. Align the guide hole on the ceiling with the hole on the mounting plate, and lead the external cables through the center hole of the mounting plate. - Page 63 Remove the protective foam inside the device and the protective film on the inside of the transparent dome cover. Connect all cables. (1) Hang the anti-drop cord on the buckle of the mounting plate. (2) Hang the base on the end of the mounting plate with a hook. (3) Connect external cables and camera tail cables, and hide them in the cavity of the base (waterproof is required).
- Page 64 Accessing the Camera Secure the base. (1) Adjust the angle of the base until it fully fits the mounting plate, and the quick mount snap will be automatically locked. (2) Tighten the screws on both sides of the base with the supplied torx wrench (screw holes are shown in ②...
- Page 65 The SD card slot may be obscured after adjusting the lens. It is recommended to install a Micro SD card before adjusting the lens. See (Optional) Insert Micro SD Card for details. Reinstall the cover, and tighten the 6 screws on the cover with the supplied torx wrench until they reach the limit.
-
Page 66: Optional Installation
Accessing the Camera 8.4 Optional Installation You can optionally purchase the GV-Mount accessories to fit your mounting environment. For details, see GV-A/T/EBDSeries IPCamera Mount Installation Guide. -
Page 67: Accessing The Camera
9. Accessing the Camera 9.1 System Requirements Once installed, your camera is accessible over the network. Make sure your PC has good network connection and meet the following requirements: Intel Core i5-4670, 3.40 GHz Memory DDR3 8 GB RAM On Board Graphics Intel HD Graphics 4600 (Versions of driver from year 2014 or later required) ⚫... -
Page 68: Looking Up The Dynamic Ip Address
Accessing the Camera 9.2 Looking Up the Dynamic IP Address By default, when the camera is connected to LAN a with DHCP server, it is automatically assigned with a dynamic IP address. Follow the steps below to look up its IP address. Note: The computer you use to configure the IP address must be under the same LAN as your camera. -
Page 69: Configuring The Ip Address
9.3 Configuring the IP Address If the camera is connected to a LAN without DHCP server, the default IP address will be 192.168.0.10. Follow the steps below to modify the IP address to avoid IP conflict with other GV-IP devices on the same LAN. 1. -
Page 70: The Web Interface
10. The Web Interface Once you log in the Web interface, you will see the live view as shown below. GV-TMS Series GV-TMS8800: 12 13 14 15 16 17 18 GV-TMS20811: No. Name Function Set the display ratio of the image. ◼... - Page 71 Stop/start live view of the selected channel. 3. Stop / Start Live View Stop/start local recording. 4. Local Recording Select a live video stream: main stream, sub stream or third 5. Live Stream stream (when enabled). Open the image setting page. – See 3.5.1 Image. 6.
- Page 72 Accessing the Camera Other Models 12 13 14 15 16 17 18 No. Name Function Set the display ratio of the image. • Scale: display images by 16:9. Proportional • Stretch: display images by window size. • Original: display images in its original size. Select a live video stream: main stream, sub stream or third Live Stream stream (when enabled).
- Page 73 Play/Stop Play or stop live video. Only for audio-supporting models, adjust the audio output Video Volume volume on the PC. Only for audio-supporting models, enable or disable Microphone microphone. Only for audio-supporting models, adjust the microphone Microphone volume on the PC during audio communication between the PC Volume and the camera.
- Page 74 Accessing the Camera Note: The paths for saving snapshots and local recordings are set in Local Settings. See 3.1.2 Local Parameters in the User’s Manual. The No. 19 and 20 buttons will appear on the floating toolbar when you move the mouse cursor onto the live view.
-
Page 75: Upgrading System Firmware
11. Upgrading System Firmware GeoVision periodically releases updated firmware on the company website. To load the new firmware into the camera, follow the instructions below. 1. At the top of the Web interface, click Setup. 2. In the left menu, select System and select Maintenance. This page appears. -
Page 76: Restoring To Factory Default
12. Restoring to Factory Default If for any reason the camera is not responding correctly, you can restore the camera back to its factory default settings using the Web interface or the Default button. To use the Web interface: 1. In the Web interface, click Setup. 2. -
Page 77: Connecting To Ua-Snvr / Hd Dvr / Gv-Rnvr
13. Connecting to UA-SNVR / HD DVR / GV-RNVR To access the dual-sensor live view from GV-TMS8800 on UA-SNVR / HD DVR, GV-RNVR, follow the instructions below. On the Web interface of UA-SNVR / HD DVR, or GV-RNVR, go to Remote Setting >...
Need help?
Do you have a question about the GV-ABL Series and is the answer not in the manual?
Questions and answers