Yamaha MOTIF ES6 Owner's Manual page 90

Editing a Performance
TIP Editing a Performance by using the Knobs
The four knobs at the top left of the instrument are not only for tweaking the sound while you perform — you can also use
them to edit a Performance, either in the Performance Play mode or the Performance Edit mode.
When the [PAN/SEND] indicator is turned on:
PAN Determines the stereo pan position of the Performance.
REVERB Determines the amount of Reverb effect that is applied to the
Performance.
CHORUS Determines the amount of Chorus effect that is applied to the
Performance.
TEMPO Determines the tempo of the Arpeggio assigned to the currently selected
Performance.
When the [TONE] indicator is turned on:
CUTOFF Raises or lowers the Filter cutoff frequency to adjust the tone brilliance.
RESONANCE Boosts or attenuates the level at the area around the Filter cutoff
frequency.
ATTACK Determines the attack time of the sound. For example, you can adjust a
strings Voice so that the sound gradually swells in volume by setting a
slow attack time – simply turn this knob to the right.
RELEASE Determines the release time of the sound. Turning the knob to the right sets a
long release time and (depending on the Voice assigned to the selected
Performance) lets the sound sustain after the key is released. To produce a
sharp release, in which the sound abruptly cuts off, set a short release time.
n
The settings above are applied as offsets to the AEG and FEG settings in the Performance Edit mode.
When the [ARP FX] indicator is turned on:
SWING Adjusts the swing feel of the Arpeggio playback.
GATE TIME Adjusts the Gate Time (length) of the Arpeggio notes.
VELOCITY Adjusts the velocity of the Arpeggio notes.
UNITMULTIPLY Adjusts the Arpeggio playback time based on tempo.
When the [EQ] indicator is turned on:
LO Determines the amount of boost or attenuation applied to the low
frequency band of the Master EQ.
LO MID Determines the amount of boost or attenuation applied to the low-
midrange frequency band of the Master EQ.
HI MID Determines the amount of boost or attenuation applied to the high-
midrange frequency band of the Master EQ.
HI Determines the amount of boost or attenuation applied to the high
frequency band of the Master EQ.
n
The settings above are applied as offsets to the EQ settings in the [PERFORM]
[SF2] MEQ (Master EQ) display.
When both the [PAN/SEND] and [TONE] indicators are turned on (by pressing them simultaneously):
ASSIGN A Adjusts parameters assigned to these knobs in the [UTILITY]
ASSIGN B
ASSIGN 1 Depends on the settings of the Voice assigned to the selected Performance.
ASSIGN 2
n
In addition to above functions, Master Effect related parameters (set in the [PERFORM]
[SF3] MEF display) can be assigned to these four knobs by pressing the [ARP FX] and [EQ] buttons simultaneously. The particular parameters
are assigned to the four knobs can be set in the [UTILITY]
90
Owner's Manual
[PERFORM] Performance selection
[F2] OUT/MEF [SF1] OUT
[PERFORM] Performance selection
[F2] OUT/MEF [SF1] OUT
[PERFORM] Performance selection
[F2] OUT/MEF [SF1] OUT
[PERFORM] Performance selection
[PERFORM] Performance selection
[PERFORM] Performance selection
[PERFORM] Performance selection
[PERFORM] Performance selection
[PERFORM] Performance selection
[F3] ARP [SF3] PLAY FX
[PERFORM] Performance selection
[F3] ARP [SF3] PLAY FX
[PERFORM] Performance selection
[F3] ARP [SF3] PLAY FX
[PERFORM] Performance selection
[F3] ARP [SF3] PLAY FX
[PERFORM] Performance selection
[F1] GENERAL [SF3] MEQ OFS
[PERFORM] Performance selection
[F1] GENERAL [SF3] MEQ OFS
[PERFORM] Performance selection
[F1] GENERAL [SF3] MEQ OFS
[PERFORM] Performance selection
[F1] GENERAL [SF3] MEQ OFS
Performance selection
[F4] CTL ASN [SF2] ASSIGN display.
Performance selection
[F4] CTL ASN [SF5] MEF display.
[EDIT] [COMMON] Page 213
Pan
[EDIT] [COMMON] Page 213
RevSend
[EDIT] [COMMON] Page 213
ChoSend
[F6] ARP Tempo Page 213
[F5] EG CUTOF Page 213
[F5] EG RESO Page 213
[F5] EG ATK (AEG) Page 213
[F5] EG REL (AEG) Page 213
[EDIT] [COMMON] Page 214
Swing
[EDIT] [COMMON] Page 214
GateTimeRate
[EDIT] [COMMON] Page 214
VelocityRate
[EDIT] [COMMON] Page 214
UnitMultiply
[EDIT] [COMMON] Page 213
LOW
[EDIT] [COMMON] Page 213
LOW MID
[EDIT] [COMMON] Page 213
HIGH MID
[EDIT] [COMMON] Page 213
HIGH
[EDIT] [COMMON] [F2] OUT/MEF
Page 263
Page 192
[COMMON] [F2] OUT/MEF