Yamaha MOTIF ES6 Owner's Manual page 134

Creating a Song on the MOTIF ES
4
Select a file (
Move the cursor to the file (extension: W7A) which was saved as "All" on previous page.
When Type is set to "All," go to step #5.
When Type is set to something other than "All," follow the instructions below then go to step #5.
When Type is set to "Voice" or "Performance":
You can select and load a specified Voice or Performance in the file (extension: W7A) to this instrument.
Move the cursor to the file (extension:
W7A) which was saved as "All" on
previous page.
When Type is set to "Song" or "Pattern":
You can select and load a specified Song or Pattern in the file (extension: W7A) to this instrument.
Move the cursor to the file (extension:
W7A) which was saved as "All" on
previous page.
When Type is set to "Waveform":
You can select and load a specified Waveform in the file (extension: W7A) to this instrument.
Move the cursor to the file (extension:
W7A) which was saved as "All" on
previous page.
In this case, the destination differs depending on the mode selected before entering the File mode.
When entering the File mode from the Voice mode:
When entering the File mode from the Performance mode:
When entering the File mode from the Song mode/Pattern mode:
134
Owner's Manual
) to be loaded.
ENTER
All Voices or Performances in the
selected file are listed. Move the
cursor to the desired Voice or
EXECUTE
Performance to be loaded.
ENTER
All Songs or Patterns in the
selected file are listed. Move the
cursor to the desired Song or
EXECUTE
Pattern to be loaded.
ENTER
All Waveforms in the selected file
are listed. Move the cursor to the
desired Waveform to be loaded.
EXECUTE
ENTER
EXECUTE
ENTER
EXECUTE
ENTER
EXECUTE
Set the Voice bank and number as the destination.
Set the Part of the current Performance then set the Voice bank/number of the Part as the
destination.
Set the track of the current Song/Pattern as the destination.
Select the desired Voice or
Performance.
Select the destination Voice number
or Performance number.
Select the desired Song or Pattern.
Select the destination Song number
or Pattern number.
Select the desired Waveform.
Select the destination. (See below.)