Functions And Sub-Functions; Selecting A Program - Yamaha MOTIF ES6 Owner's Manual

Functions and Sub-Functions

Each mode described above contains various displays, with various functions and parameters. To navigate your way through
these displays and select a desired function, use the [F1] - [F6] buttons and the [SF1] - [SF5] buttons. When you select a mode,
the available displays or menus appear directly above the buttons at the bottom of the display (as shown below).
Using the Function buttons [F1] - [F6]
SCENE
Depending on the currently selected mode, up to six functions are available and can be called up with the [F1] - [F6] buttons.
Keep in mind that the available functions differ depending on the selected mode.
Using the Sub-Function buttons [SF1] - [SF5]
SCENE
Depending on the currently selected mode, up to five functions (sub-functions) are available and can be called up with the [SF1]
- [SF5] buttons. Keep in mind that the available functions differ depending on the selected mode. (Some displays may not have
any sub-functions for these buttons.)

Selecting a Program

In order to play the MOTIF ES you'll need to call up one of its programs, i.e., a Voice, Performance, Song, Pattern, or Master.
These programs can be selected in each Play mode via the same procedure.
Using the [INC/YES], [DEC/NO] buttons and the data dial
The [INC/YES] and [DEC/NO] buttons let you step up or down through the program numbers in any of the Play modes (Voice,
Performance, Song, Pattern, and Master).
Rotating the data dial to the right (clockwise) increases the program number, while rotating it to the left (counter-clockwise)
decreases it. This control works in the same way as the [INC/YES] and [DEC/NO] buttons, but lets you scroll through the
programs more quickly.
SF1 SF 2 SF 3 SF 4 SF 5
F 1 F 2 F 3 F 4 F 5
SF1 SF 2 SF 3 SF 4 SF 5
F 1 F 2 F 3 F 4 F 5
Decreases number
DEC/NO
Decreases number
These functions can be selected via the
corresponding button ([F1] - [F6]).
INFORMATION
F 6
In this example, press the [F5] button to go
to the LFO display.
These functions can be selected via the
corresponding button ([SF1] - [SF5]).
INFORMATION
In this example, press the [SF5] button to
F 6
go to the OTHER display.
Increases number
INC / YES
Increases number
Functions and Sub-Functions
47
Owner's Manual