Yamaha MOTIF ES6 Owner's Manual page 229

TR (Track)
001 : 1 : 000 - 999 : 4 : 479
Type
Grid
09: Separate Chord
TR (Track)
001 : 1 : 000 - 999 : 4 : 479
Clock
[F3] EVENT (Event Job)
n
Before executing the Event Job, make sure that you specify the track and range (measure : beat : clock) to which the Job is applied. Please note that the track to be specified
varies depending on the Job.
01: Shift Clock
TR (Track)
001 : 1 : 000 - 999 : 4 : 479
Clock
Direction
02: Copy Event
NumberOfTimes
CAUTION When Copy Event is executed, any data already existing at the Destination location will be overwritten.
03: Erase Event
TR (Track)
001 : 1 : 000 - 999 : 4 : 479
Event Type
n
Keep in mind that applying this Job to a track with Sample Voices erases the events that trigger the samples, but it does not erase the actual samples themselves.
Determines the track (01-16, all) and range of measures/beats/clocks over which the Job is applied.
Determines how the chord note data is sorted.
Settings: up, down, up&down, down&up
up .................... The notes are sorted in ascending order. After executing this Job with this setting, execute the Separate Chord Job to
create a guitar-like upstroke strum.
down................ The notes are sorted in descending order. After executing this Job with this setting, execute the Separate Chord Job to
create a guitar-like downstroke strum.
up&down ......... Sorts chord notes on downbeats in ascending order and chord notes on upbeats in descending order, based on the
Grid setting (below).
down&up ......... Sorts chord notes on downbeats in descending order and chord notes on upbeats in ascending order, based on the
Grid setting (below).
Determines the type of note that serves as the basis for the Chord Sort Job.
Settings: 32nd note, 16th note triplet, 16th note, 8th note triplet, 8th note, 1/4 note triplet, 1/4 note
This Job slightly separates notes in chords within the specified range, inserting a specified number of clocks
between each note. Use this Job after the Chord Sort Job above, to create guitar-like upstroke or downstroke effects.
Determines the track (01-16, all) and range of measures/beats/clocks over which the Job is applied.
Determines the number of clock cycles inserted between adjacent chord notes.
Settings: 000 ~999
n
Note that there are 480 clock cycles per quarter note.
n
It is not possible to separate chords so that they cross the next chord or they overstep the range (set above).
This Job shifts all data events in the specified range forward or backward by the specified number of clocks.
Determines the track (01-16, TMP, SCN, all) and range of measures/beats/clocks over which the Job is applied.
Determines the amount by which the data will be delayed or advanced in measures, beats, and clocks.
Settings: 000:0:000 ~ 999:3:479
Determines the direction in which the data will be shifted. ADVANCE moves the data toward the beginning of the
sequence, while DELAY shifts the data toward the end of the sequence.
Settings: Advance, Delay
Source track and range in measures, beats, and clocks
Destination track and the top (measure, beat, and clock)
of the destination.
Determines the number of times the data is copied.
Settings: 01 ~ 99
This Job clears all specified events from the specified range, effectively producing a segment of silence.
Determines the track (01-16, TMP, SCN, all) and range of measures/beats/clocks over which the Job is applied.
Determines the event type to be erased. All events are cleared when ALL is selected. Individual control change
numbers can be specified when erasing control change events.
Settings:
When TR is set to 01~16: Note (Note events), PC (Program Change), PB (Pitch Bend), CC (Control Change)*, CAT (Channel Aftertouch),
PAT (Polyphonic Aftertouch), EXC (System Exclusive), All (all events)
When TR is set to "TMP" (Tempo): TMP (tempo)
When TR is set to "SCN" (Scene): SceneMemory (Scene change information), TrackMute (Track mute setting change information)
* You can also specify the CC No. (Control Change number).
Song Job mode
This Job copies all data from a specified source
range to a specified destination location.
Execute this Job after setting:
• Source track (01-16, TMP, SCN, all)
• Source range (measure : beat : clock)
• Destination track (01-16, TMP, SCN, all)
• Destination range (measure : beat : clock)
• Top measure of destination
• Count (number of times data is to be copied)
Owner's Manual
229