Yamaha MOTIF ES6 Owner's Manual page 116

Creating a Song on the MOTIF ES
Press the [F] (Play) button to start recording
4
and play the Pattern.
Change the Section at the desired points, as the Pattern plays.
LOCATE
Section I-P
PRE 5 PRE 6 USER 1
A. PIANO KEYBOARD ORGAN
A B C
SYN LEAD SYN PAD/ SYN COMP CHROMATIC
CHOIR
Section A-H
5
Press the [ ] (Stop) button to stop recording.
Operation returns to the Pattern Chain display.
Press the [F] (Play) button to hear the recorded
6
Pattern Chain.
Save the created Pattern data to a SmartMedia/
7
USB storage device (page 132) before turning the
power off.
You can also record the Tempo track and Scene track as
desired. When the recording track is set to "tempo," move the
cursor to tempo value (during recording in step #4 above)
and use the data dial and the [INC/YES]/[DEC/NO] buttons to
change the tempo while the Chain is playing. When the
recording track is set to "scene," press the [MUTE] button
(the lamp lights) and use the number buttons [1] - [16] to turn
each track on/off as desired during recording.
116
Owner's Manual
SEQ TRANSPORT
1 2
CATEGORY
USER 2 GM PLG 1 PLG 2 PLG 3 SEARCH
GUITAR/ BASS STRINGS BRASS REED/PIPE
PLUCKED
D E F G H SECTION
DRUM/ SE MUSICAL FX COMBI
PERCUSSION PERCUSSION
Editing a Pattern Chain
The Pattern Chain Edit mode makes it possible to edit the
order of the Sections in a chain as well as inserting tempo,
and scene/mute event data.
In the Pattern Play mode, select a Pattern for
1
which data has already been created.
Press the [F6] CHAIN button to call up the
2
Pattern Chain Play display.
Press the [EDIT] button to enter the Pattern
3
Chain Edit mode, then edit each track of the
Pattern Chain.
Pattern Track Edit
[F4] button
Enter the desired section
(A - P) or the End mark by
using the [INC/YES] and
[DEC/NO] buttons.
Scene Track Edit
[F4] button
Tempo Track Edit
[F4] button
Press the [EXIT] button to return to the Pattern
4
Chain Play display, then press the [F] (Play)
button to hear the edited Pattern Chain.
Save the created Pattern Chain as Pattern data to
5
a SmartMedia/USB storage device (page 132)
before turning the power off.
EDIT
Press the [F6] button to
clear the event at the
cursor location.
Press the [F5] button to insert
the event to the cursor location.
Press the [F6] button to delete
the event at the cursor location.