Extreme Networks ExtremeWireless AP4020 Installation Manual page 41

Installation
Figure 29: AH-ACC-BKT-AX-IL accessory bracket circular tip
Call out Description
1 AH-ACC-BKT-AX-IL bracket circular tip
5. Press and rotate the access point clockwise about one-sixth of a turn until it locks
into place on the accessory bracket.
6. Attach the network cable.
7. Place the cable cover over the Ethernet cable.
8. Replace the ceiling tiles.
Install the Access Point on a 15/16-inch T-bar
Before You Begin
Obtain the following items:
•
One access point
•
One ACC-BKT-TB-NF adapter
•
One AH-ACC-BKT-AX-TB accessory
About This Task
Use the ACC-BKT-TB-NF bracket when you install the AP on a suspended ceiling with
15/16-inch grid system.
Procedure
1. Remove the ceiling tiles.
2. Using the adapter guide on the top half of the ACC-BKT-TB-NF adapter, align and
attach the -NF on to the ceiling rail.
Install the Access Point on a 15/16-inch T-bar
ExtremeWireless™ AP4020 Installation Guide 41