Dynojet POWER VISION 4 Installation Manual page 4

GETTING STARTED
1
Download and install the Dynojet Power Vision 4 app
from the Apple App or Google Play Store.
2
Verify Bluetooth and Location are enabled.
Location permission is required for the app to access
the phone's Bluetooth hardware.
3
Connect the Power Vision to the vehicle diagnostic port.
4
Turn the ignition switch to the ON position and the run
switch to the RUN position, but do not start the vehicle.
5
Open the Dynojet Power Vision 4 app.
6
Log in using your Dynojet account login information.
Don't have a Dynojet account? Press I don't have an
account and create one. Enter your information and a
password and press Register.
Forgot your password? Press Forgot your password?
and follow the on-screen prompts.
7
Press Scan.
8
Press Identify to briefl y illuminate the blue LED on your
Power Vision 4.
9
Select the Dynojet PV4.
10
Press the Pencil to edit the vehicle name. Press Save
to save.
11
Press Tunes.
Note: The fi rst time you connect to a vehicle you will
need to Read the ECU. Press Yes to continue.
12
Type in a stock fi le name. The VIN is used by default.
This fi le will be uploaded to your Cloud account.
4 POWER VISION 4
Identify and
select the
PV4
Log in
Forgot your
password
Scan for PV4
Name the
stock fi le
INSTALLATION AND USER GUIDE
Enter email
Indicates the
vehicle you are
connected to
Edit pencil
First time
connections
will need to
read the ECU