Vivotek IP8132 User Manual page 100

VIVOTEK
Destination: Select the network storage that was set up for the recorded video files.
Capacity: You can choose either the entire free space available or limit the reserved space. The
recording size limit must be larger than the reserved amount for cyclic recording�
File name prefix: Enter the text that will be appended to the front of the file name.
Enable cyclic recording: If you check this item, when the maximum capacity is reached, the oldest file
will be overwritten by the latest one� The reserved amount is reserved for cyclic recording during the
transaction stage when the storage space is about to be fully filled. This value must be larger than 15
MBytes�
If you want to enable recording notification, please click
Recording notify on page 85 for detailed information�
When completed, select Enable this recording� Click Save to enable the setting and click Close to exit
this page. When the system begins recording, it will send the recorded files to the Network Storage.
The new recording name will appear in the drop-down list on the recording page as shown below�
To remove a recording setting from the list, select a recording name from the drop-down list and click
Delete�
■ Click Video (Name): Opens the Recording Settings page to modify.
■ Click ON (Status): The Status will become
■ Click NAS (Destination): Opens the file list of recordings as shown below. For more information about
folder naming rules, please refer to page 94 for details�
100 - User's Manual
Application
OFF and stop recording�
20110118
20110118
20110118
to set up� Please refer to Trigger >