Vivotek IP7142 User Manual page 99

daylight_enable <boolean>
daylight_dstactual <boolean>
mode
daylight_auto_beg string[19]
intime
daylight_auto_end string[19]
time
daylight_manual_ <integer>
offset
daylight_manual_ string[19]
begintime
daylight_manual_ string[19]
endtime
daylight_timezone NONE
s
updateinterval 0,
3600,
86400,
604800,
2592000
enableir <boolean>
restore 0,
<positive integer>
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
6/6
6/7
6/7
6/7
6/6
6/6
6/6
6/6
6/6
6/6
7/6
Krasnoyarsk
320: GMT 08:00 Beijing, Chongging, Hong
Kong, Kuala Lumpur, Singapore, Taipei
360: GMT 09:00 Osaka, Sapporo, Tokyo,
Seoul, Yakutsk
380: GMT 09:30 Adelaide, Darwin
400: GMT 10:00 Brisbane, Canberra,
Melbourne, Sydney, Guam, Vladivostok
440: GMT 11:00 Magadan, Solomon Is., New
Caledonia
480: GMT 12:00 Aucklan, Wellington, Fiji,
Kamchatka, Marshall Is.
520: GMT 13:00 Nuku'Alofa
Enable automatic daylight saving time in time
zone.
Check if current time is under daylight saving
time.
Display the current daylight saving start time.
(product dependent)
Display the current daylight saving end time.
(product dependent)
Manually set daylight saving time with offset.
Manually set daylight saving time beginning.
Manually set daylight saving time end.
List time zone index which support daylight
saving time.
0 to Disable automatic time adjustment,
otherwise, it indicates the seconds between
NTP automatic update intervals.
Enable IR control
(capability.nir>0)
(product dependent).
Restore the system parameters to default
values after <value> seconds.
User's Manual - 99