Vivotek IP7142 User Manual page 113

axisx
axisy
preset_i<0~(npreset-
1)>_name
uart
cameraid
isptz
disablemdonptz
pantilt_port
pantilt_camid
zoom_port
zoom_camid
patrolseq
patroldwelling
Group: uart (capability.nuart>0) (product dependent)
NAME
ptzdrivers_i<0~19, 127>_name
ptzdrivers_i<0~19, 127>_location
enablehttptunnel
Group: uart_i<0~(n-1)> n is uart port count
NAME
baudrate
databit
paritybit
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
-104 ~ 104 1/7
-15 ~ 28 1/7
string[40] 1/4
0 ~ (m-1), m is 1/4
UART count
0~255 1/4
0 ~ 2 1/7
<boolean> 1/4
<integer> 1/4
0 ~ 255 1/4
<integer> 1/4
0 ~ 255 1/4
string[64] 1/4
string[128] 1/4
VALUE
string[40]
string[128]
<boolean>
(capability.nuart>0)
VALUE SECURITY
(get/set)
110,300,600,120 4/4
0,2400,3600,480
0,7200,9600,192
00,38400,57600,
115200
5,6,7,8 4/4
none, 4/4
Axis X coordinate, used internally.
Axis Y coordinate, used internally.
Name of the preset location.
Select corresponding uart
(capability.nuart>0).
Camera ID controlling external PTZ camera.
0: disable PTZ commands.
1: enable PTZ commands with PTZ driver.
2: enable PTZ commands with UART tunnel.
Disable motion detection on PTZ operation.
Pan and tilt channel.
ID of camera on pan/tilt channel.
Zoom channel.
ID of camera on zoom channel.
(For external device)
The indexes of patrol points, separated by ","
(For external device)
The dwelling time of each patrol point, separated
by ","
SECURITY DESCRIPTION
(get/set)
1/4 Name of the PTZ driver.
1/4 Full path of the PTZ driver.
4/4 Enable HTTP tunnel channel to control
UART.
DESCRIPTION
Set baud rate of COM port.
Data bits in a character frame.
For error checking.
User's Manual - 113