Vivotek IP7142 User Manual page 133

UART HTTP Tunnel Channel
Note: This request requires Operator privileges.
Method: GET and POST
Syntax:
http://<servername>/cgi-bin/operator/uartchannel.cgi?[channel=<value>]
-------------------------------------------------------------------------
GET /cgi-bin/operator/uartchannel.cgi?[channel=<value>]
x-sessioncookie: string[22]
accept: application/x-vvtk-tunnelled
pragma: no-cache
cache-control: no-cache
-------------------------------------------------------------------------
POST /cgi-bin/operator/uartchannel.cgi
x-sessioncookie: string[22]
content-type: application/x-vvtk-tunnelled
pragma : no-cache
cache-control : no-cache
content-length: 32767
expires: Sun, 9 Jam 1972 00:00:00 GMT
User must use GET and POST to establish two channels for downstream and upstream. The x-sessioncookie
in GET and POST should be the same to be recognized as a pair for one session. The contents of upstream
should be base64 encoded to be able to pass through a proxy server.
This channel will help to transfer the raw data of UART over the network.
PARAMETER VALUE
channel 0 ~ (n-1)
Event/Control HTTP Tunnel Channel
Note: This request requires
Method: GET and POST
Syntax:
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
(capability.nuart>0)
DESCRIPTION
The channel number of UART.
Administrator privileges.
User's Manual - 133