Vivotek IP7142 User Manual page 52

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Advanced Mode
Sensor Settings
Click Sensor Settings to open the Sensor Settings page. On this page, you can set the exposure level,
and AGC (Auto Gain Control) settings�
You can configure two sets of sensor settings: one for normal situations, the other for special situations,
such as day/night/schedule mode�
■ Exposure level: You can manually set the exposure level, which ranges from 1 to 8 (dark to bright). The
default value is 4�
■ Max gain (Auto Gain Control): You can manually set the AGC level (2X, 4X or 8X). The default value is
4X.
■ Enable WDR (Wide Dynamic Range): Select this option to enable the WDR function� With WDR, the
Network Camera can cope with very challenging lighting conditionsby combining the dark and bright
parts of an image to generate a realistic image representative of what is seen with the human eye�
Note: If you select this function, Exposure level and Enable AGC function will be disabled.
You can click Preview to fine-tune the image, or click Restore to recall the original settings without
incorporating the changes� When completed with the settings on this page, click Save to enable the
settings and click Close to exit the page.
52 - User's Manual
Sensor Setting 1:
For normal situations
Sensor Setting 2:
For special situations