Vivotek IP7142 User Manual page 119

trigger boot,
di,
motion,
seq,
recnotify,
tampering
di <integer>
mdwin <integer>
mdwin0 <integer>
inter 1~999
weekday <integer>
begintime hh:mm
endtime hh:mm
action_do_i<0~( 0, 1
ndo-1)>_enable
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
6/6 Indicate the trigger condition:
"boot" = System boot
"di"= Digital input
"motion" = Video motion detection
"seq" = Periodic condition
"visignal" = Video input signal loss.
"pir" = PIR detection.
"recnotify" = Recording notification.
"audioswitch" = Audio switch.
"tampering" = Tamper detection.
"iva" = IVA trigger.
6/6 Indicate which DI detects.
This field is required when trigger condition is "di".
One bit represents one digital input. The LSB indicates DI 0.
6/6 Indicate which motion detection windows detect.
This field is required when trigger condition is "md".
One bit represents one window.
The LSB indicates the 1
For example, to detect the 1
6/6 Indicate which motion detection windows of profile 1 detect.
6/6 Interval of snapshots in minutes.
This field is used when trigger condition is "seq".
6/6 Indicate which weekday is scheduled.
One bit represents one weekday.
bit0 (LSB) = Saturday
bit1 = Friday
bit2 = Thursday
bit3 = Wednesday
bit4 = Tuesday
bit5 = Monday
bit6 = Sunday
For example, to detect events on Friday and Sunday, set
weekday as 66.
6/6 Begin time of the weekly schedule.
6/6 End time of the weekly schedule.
(00:00 ~ 24:00 sets schedule as always on)
6/6 Enable or disable trigger digital output.
st
window.
st rd
and 3 windows, set mdwin as 5.
User's Manual - 119