Relay Output - Vitek VT-XL1680 User Manual

6.4.8 RELAY OUTPUT

Highlight RELAY OUTPUT and then press the
ENTER button to access the relay output submenu.
The first page lists relay output options for channels 1
through 8. For each channel, it is possible to
customize relay 1 through 3 for each of the event
options. To change the relay output for each event,
highlight the relay output and then press + or –
buttons to change to the desired output number.
The second page lists relay output options for
channels 9 through 16.
The third page lists the relay output time for relay
outputs 1 through 3. Select the relay output time from
1 to 30 seconds. The default time is 1 second.
The fourth relay can be customized to be used with
the following options:
POWER LOSS: relay triggered when the
DVR loses power
HDD ERROR: relay triggered when the
hard disk drive fails
USER: manual relay operation
NOT USED
106
SAGA "XL" Series