Danfoss BOCK FK30 Operating Manual page 5

1| Safety
1.4 General safety instructions
WARNING
1.5 Intended use
These assembly instructions describe the standard version of the FK30 manufactured by Bock.
The compressor is intended for use in refrigeration systems in compliance with the limits of
application. Only the refrigerant specified in these instructions may be used.
Any other use of the compressor is prohibited!
The Bock refrigerating compressor named in the title is intended for installation in a machine (within
the EU according to the EU Directives 2006/42/EC Machinery Directive, 2014/68/EU Pressure
Equipment Directive).
Commissioning is permissible only if the compressor has been installed in accordance with these
assembly instructions and the entire system into which it is integrated has been inspected and
approved in accordance with legal regulations.
© Danfoss | Climate Solutions | 2025.04
Risk of accidents.
Refrigerating compressors are pressurised machines and as such
call for heightened caution and care in handling.
The maximum permissible overpressure must not be exceeded,
even for testing purposes.
Risk of burns!
- Depending on the operating conditions, surface temperatures of
over 60°C on the discharge side or below 0°C on the suction side
can be reached.
- Avoid contact with refrigerant necessarily.
Contact with refrigerant can cause severe burns and skin
damage.
AQ450641889580en-000402 | 5
D
GB
F
I
Tr
Ru