Related Manuals for Biamp UCC LENOVO TSC2-IP-MTR
Summary of Contents for Biamp UCC LENOVO TSC2-IP-MTR
- Page 1 BIAMP UCC - LENOVO TSC2 - IP SYSTEM INSTALLATION GUIDE UCC LENOVO TSC2 - IP - MTR UCC LENOVO TSC2 - IP - ZOOM support@biamp.com www.biamp.com...
- Page 2 • Safety guide • -15.2 m – 3048 m (-50 ft – 10,000 ft) Temperature: Setup information • 10°C – 35°C (50°F – 95°F) Lenovo TSC2-IP Installation, Setup & Configuration Relative Humidity • 20% – 80% (non-condensing) Installation Guide Biamp UCC-Lenovo TSC2-IP...
-
Page 3: Installation
INSTALLATION There are 3 mounting options for the Core device: Wall Mount, Under-Table on the Table WALL MOUNT OPTION Biamp UCC-Lenovo TSC2-IP Installation Guide... - Page 4 INSTALLATION Wall-Mount Option (continued) Installation Guide Biamp UCC-Lenovo TSC2-IP...
- Page 5 INSTALLATION Wall-Mount Option (continued) Biamp UCC-Lenovo TSC2-IP Installation Guide...
- Page 6 INSTALLATION Wall-Mount Option (continued) Installation Guide Biamp UCC-Lenovo TSC2-IP...
- Page 7 INSTALLATION Wall-Mount Option (continued) Biamp UCC-Lenovo TSC2-IP Installation Guide...
- Page 8 INSTALLATION UNDER - TABLE MOUNT OPTION Installation Guide Biamp UCC-Lenovo TSC2-IP...
- Page 9 INSTALLATION Under-Table Mount Option (continued) Biamp UCC-Lenovo TSC2-IP Installation Guide...
- Page 10 INSTALLATION Under-Table Mount Option (continued) Installation Guide Biamp UCC-Lenovo TSC2-IP...
- Page 11 INSTALLATION Under-Table Mount Option (continued) Biamp UCC-Lenovo TSC2-IP Installation Guide...
- Page 12 INSTALLATION Under-Table Mount Option (continued) Installation Guide Biamp UCC-Lenovo TSC2-IP...
- Page 13 The Core and Link with the meeting - not a BYOM connection. will each need to be powered by their power supplies. The Controller is powered by PoE from the ethernet cable from the Link device. Biamp UCC-Lenovo TSC2-IP Installation Guide...
- Page 14 TSC2 CORE HDMI In (from Link) Power USB-C (2)- USB 10 Gbs USB-C - BYOM HDMI (Out) USB-A (3) - USB 5 Gbs Ethernet Connector (1000 Mbps) USB-A - Hi-Speed USB HDMI (Out) (to Link only) Installation Guide Biamp UCC-Lenovo TSC2-IP...
- Page 15 INSTALLATION TSC2 Core (continued) Security Lock Slot Power ON/OFF (indicates power) Biamp UCC-Lenovo TSC2-IP Installation Guide...
- Page 16 Not a BYOM connection Ignore Link and Controller DIP switches -they do not matter for setup. When the Core and Link are powered, and CAT5e cables are connected, green LEDs on the Ethernet ports indicate proper connection. Installation Guide Biamp UCC-Lenovo TSC2-IP...
- Page 17 INSTALLATION IP CONTROLLER - INSTALL BACKPLATE Biamp UCC-Lenovo TSC2-IP Installation Guide...
-
Page 18: Operation
The TSC2 system will show on-screen prompts for basic setup. Additional steps will need to be taken to enable BYOM connections. These are explained in the Cornerstone article. CONTACT US Email: support@biamp.com Web: support.biamp.com Warranty: biamp.com/legal/warranty-information Safety & Compliance: biamp.com/compliance...
Need help?
Do you have a question about the UCC LENOVO TSC2-IP-MTR and is the answer not in the manual?
Questions and answers