Page 1
Using the MPX200 with a Microsoft Teams Room PC 1. MPX200 has a uniform green halo light in the idle mode. This shows that it is available. 2. When connecting one of the USB-C cables to a device the light will shine brighter in that section and the other parts will dim down to shw that the cable is connected and charging.
Page 2
4. When pressing one of the touch buttons on a connected port you will start screen sharing through HDMI-Ingest. Cameras, microphones and speakers will be connected to the MTR device. The light in that section will turn blue and the light will turn off for other sections. https://support.biamp.com/Evoko/MPX200/Getting_Started_with_MPX200/Using_the_MPX200_with_a_Microsoft_Teams_Ro… Updated: Mon, 19 Aug 2024 10:45:10 GMT Powered by...
Page 3
6. If you want to access the camera, speaker and microphone through your computer you can long press any button for 2 seconds to enter the BYOM-mode. The complete circle will pulse red a couple of times to indicate the mode switch. https://support.biamp.com/Evoko/MPX200/Getting_Started_with_MPX200/Using_the_MPX200_with_a_Microsoft_Teams_Ro… Updated: Mon, 19 Aug 2024 10:45:10 GMT Powered by...
Page 4
MTR-device will take over control of the cameras, speakers and microphone. You will still share the screen. https://support.biamp.com/Evoko/MPX200/Getting_Started_with_MPX200/Using_the_MPX200_with_a_Microsoft_Teams_Ro… Updated: Mon, 19 Aug 2024 10:45:10 GMT Powered by...
Page 5
9. To stop sharing, just press one more time on the active touch button. The lights will go back to show which ports are connected. ◦ 10. When all cables are disconnected the device will go back into idle mode. https://support.biamp.com/Evoko/MPX200/Getting_Started_with_MPX200/Using_the_MPX200_with_a_Microsoft_Teams_Ro… Updated: Mon, 19 Aug 2024 10:45:10 GMT Powered by...
Need help?
Do you have a question about the MPX200 and is the answer not in the manual?
Questions and answers