Table of Contents
Advertisement
Camera
Memory in use
— Select where you want to store your
●
images.
Rotate image
— Select whether you want images
●
that are captured when the device is held upright to be
rotated when you open them in Gallery.
Restore camera settings
●
default values to the camera settings.
Setup settings—adjust colour and
lighting
To enable the camera to reproduce colours and lighting
more accurately or to add effects to your pictures or
videos, scroll through the active toolbar, and select from
the following options:
Flash mode
( ) (images only) — Select the desired
●
flash mode.
Colour tone
( ) — Select a colour effect from the list.
●
White balance
( ) — Select the current lighting
●
condition from the list. This allows the camera to
reproduce colours more accurately.
Exposure compensation
●
are shooting a dark subject against a very light
background, such as snow, adjust the exposure to +1
or +2 to compensate the background brightness. For
light subjects against a dark background, use -1 or -2.
44
— Select
Yes
to return the
( ) (images only) — If you
Sharpness
( ) (images only) — Adjust the sharpness
●
of the image.
Contrast
( ) (images only) — Adjust the difference
●
between the lightest and darkest parts of the image.
Light sensitivity
( ) (images only) — Increase the
●
light sensitivity in low light conditions to decrease the
risk of images that are too dark.
The screen display changes to match any settings you
make so that you see how the change affects the pictures
or videos.
The available settings vary depending on the selected
camera.
The setup settings are camera specific; if you change the
settings in the secondary camera, the settings in the main
camera do not change. The setup settings are also
shooting mode specific; if you change the settings in the
image mode, the settings in the video mode do not
change. Switching between the modes does not reset the
defined setup settings.
The setup settings return to the default settings when you
close the camera.
If you select a new scene, the colour and lighting settings
are replaced by the selected scene. You can change the
setup settings after selecting a scene if needed.
© 2008 Nokia. All rights reserved.
Advertisement
Table of Contents
