Table of Contents
Advertisement
Extended digital zoom
●
—
On (continuous)
to be smooth and continuous between digital
and extended digital zoom,
the zoom increments to pause at the digital and
extended digital step point, and
limited amount of zoom while retaining the
image resolution.
Capture tone
— Select the tone you want to
●
hear when you take a picture.
Memory in use
●
store your images.
Rotate image
●
images that are captured when the device is held
upright to be rotated when you open them in
Gallery.
Restore camera settings
●
the default values to the camera settings.
Setup settings—adjust colour and
lighting
To enable the camera to reproduce colours and
lighting more accurately or to add effects to your
pictures or videos, scroll through the active toolbar,
and select from the following options:
Flash mode
( ) (images only) — Select the
●
desired flash mode.
72
(main camera only)
allows the zoom increments
On (paused)
Off
allows a
— Select where you want to
— Select whether you want
— Select
Yes
to return
Colour tone
●
the list.
White balance
●
allows
lighting condition from the list. This allows the
camera to reproduce colours more accurately.
Exposure compensation
●
you are shooting a dark subject against a very
light background, such as snow, adjust the
exposure to +1 or +2 to compensate the
background brightness. For light subjects
against a dark background, use -1 or -2.
Sharpness
( ) (images only) — Adjust the
●
sharpness of the image.
Contrast
( ) (images only) — Adjust the
●
difference between the lightest and darkest
parts of the image.
Light sensitivity
●
the light sensitivity in low light conditions to
decrease the risk of images that are too dark.
The screen display changes to match any settings
you make so that you see how the change affects
the pictures or videos.
The available settings vary depending on the
selected camera.
The setup settings are camera specific; if you
change the settings in the secondary camera, the
settings in the main camera do not change. The
setup settings are also shooting mode specific; if
you change the settings in the image mode, the
( ) — Select a colour effect from
( ) — Select the current
( ) (images only) — If
( ) (images only) — Increase
Advertisement
Table of Contents
