Flicker cancellation
●
flickering, select
Capture tone
— Set the tone that sounds when
●
you take a picture.
Memory in use
●
images.
Restore camera settings
●
default values to the camera settings, select
Yes.
Setup settings—adjust colour and
lighting
To enable the camera to reproduce colours and
lighting more accurately or to add effects to your
pictures or videos, scroll through the active toolbar,
and select from the following options:
Flash mode
( ) (images mode only) — Select
●
the desired flash mode.
Colour tone
( ) — Select a colour effect from
●
the list.
White balance
●
lighting condition from the list. This allows the
camera to reproduce colours more accurately.
Exposure compensation
●
only) — If you are shooting a dark subject against
a very light background, such as snow, adjust the
exposure to +1 or +2 to compensate the
68
— To avoid screen
60
Hz.
— Choose where to store your
— To return the
( ) — Select the current
( ) (images mode
background brightness. For light subjects
against a dark background, use -1 or -2.
Sharpness
( ) (images only) — Adjust the
●
sharpness of the image.
(images only) — Adjust the brightness of the
●
image
Contrast
( ) (images only) — Adjust the
●
difference between the lightest and darkest
parts of the image.
Light sensitivity
( ) (images mode only)
●
— Increase the light sensitivity in low light
conditions to decrease the risk of images that are
too dark.
The screen display changes to match any settings
you make so that you see how the change affects
the pictures or videos.
The available settings vary depending on the
selected camera.
The setup settings are camera-specific; if you
change the settings in the secondary camera, the
settings in the main camera do not change. The
setup settings are also shooting-mode specific; if
you change the settings in the image mode, the
settings in the video mode do not change.
Switching between the modes does not reset the
defined setup settings.
The setup settings return to the default settings
when you close the camera.