Table of Contents
Advertisement
Camera
Setup settings—adjust colour and
lighting
To enable the camera to reproduce colours and
lighting more accurately or to add effects to your
pictures or videos, scroll through the active toolbar,
and select from the following options:
Flash mode
( ) (images only) — Select the desired
●
flash mode.
Colour tone
( ) — Select a colour effect from the
●
list.
White balance
( ) — Select the current lighting
●
condition from the list. This allows the camera to
reproduce colours more accurately.
Exposure compensation
●
you are shooting a dark subject against a very light
background, such as snow, adjust the exposure to
+1 or +2 to compensate the background brightness.
For light subjects against a dark background, use -1
or -2.
Sharpness
( ) (images only) — Adjust the
●
sharpness of the image.
Contrast
( ) (images only) — Adjust the difference
●
between the lightest and darkest parts of the
image.
84
( ) (images only) — If
Light sensitivity
( ) (images only) — Increase the
●
light sensitivity in low light conditions to decrease
the risk of images that are too dark.
The screen display changes to match any settings you
make so that you see how the change affects the
pictures or videos.
The available settings vary depending on the selected
camera.
The setup settings are camera specific; if you change
the settings in the secondary camera, the settings in
the main camera do not change. The setup settings are
also shooting mode specific; if you change the settings
in the image mode, the settings in the video mode do
not change. Switching between the modes does not
reset the defined setup settings.
The setup settings return to the default settings when
you close the camera.
If you select a new scene, the colour and lighting
settings are replaced by the selected scene. You can
change the setup settings after selecting a scene if
needed.
Video settings
To change the main settings, in the video mode, select
Options
Settings
and from the following:
>
© 2008 Nokia. All rights reserved.
Advertisement
Table of Contents
