Setup Settings-Adjust Colour And Lighting; Video Settings - Nokia N95 User Manual

Rotate image
●
image to be rotated upright when you open it in
Gallery.
Restore camera settings
●
the default values to the camera settings.
Setup settings—adjust colour and
lighting
To enable the camera to reproduce colours and
lighting more accurately or to add effects to your
pictures or videos, scroll through the active toolbar,
and select from the following options:
Flash mode (
●
desired flash mode.
Colour tone (
●
the list.
White balance
●
lighting condition from the list. This allows the
camera to reproduce colours more accurately.
Exposure compensation
●
only) — If you are shooting a dark subject against
a very light background, such as snow, adjust the
exposure to +1 or +2 to compensate the
background brightness. For light subjects
against a dark background, use -1 or -2.
Sharpness ( ) — Adjust the sharpness of the
●
image or video image.
72
— Select whether you want the
— Select Yes to return
) (images only) — Select the
) — Select a colour effect from
( ) — Select the current
( ) (images
Contrast ( ) — Adjust the difference between
●
the lightest and darkest parts of the image or
video image.
Light sensitivity ( ) (images only) — Increase
●
the light sensitivity in low light conditions to
decrease the risk of images that are grainy or too
dark. Higher sensitivity may increase the
graininess of the images.
The screen display changes to match any settings
you make so that you see how the change affects
the pictures or videos.
The available settings vary depending on the
selected camera.
The setup settings are camera specific; if you
change the settings in the secondary camera, the
settings in the main camera do not change. The
setup settings do, however, transfer between the
image and video modes. The setup settings return
to the default settings when you close the camera.
If you select a new scene, the colour and lighting
settings are replaced by the selected scene. You can
change the setup settings after selecting a scene if
needed.

Video settings

To change the main settings, in the video mode,
select Options Settings
>
and from the following: