Data Connections And Access Points; Access Points; Create A New Access Point - Nokia 002F5S8 User Manual

You can also edit settings for Bluetooth connectivity in the
Bluetooth connectivity application.
You can also edit settings for data cable connections in
the USB application. See "USB", p. 83.

Data connections and access points

Your device supports packet data connections (network
service), such as GPRS in the GSM network. When you use
your device in GSM and UMTS networks, multiple data
connections can be active at the same time, and access
points can share a data connection. In the UMTS network,
data connections remain active during voice calls.
You can also use a WLAN data connection. Only one
connection in one wireless LAN can be active at a time,
but several applications can use the same internet access
point.
To establish a data connection, an access point is
required. You can define different kinds of access points,
such as the following:
MMS access point to send and receive multimedia
●
messages
Internet access point (IAP) to send and receive e-mail
●
and connect to the internet
Check the type of access point you need with your service
provider for the service you want to access. For
© 2008 Nokia. All rights reserved.
See "Settings", p. 80.
availability and subscription to packet data connection
services, contact your service provider.

Access points

Create a new access point

Press , and select Tools
Access points.
You may receive access point settings in a message from
a service provider. Some or all access points may be preset
for your device by your service provider, and you may not
be able to change, create, edit, or remove them.
indicates a protected access point.
indicates a packet data access point.
indicates a WLAN access point.
Tip: You can create internet access points in a
wireless LAN with the WLAN wizard.
To create a new access point, select
access point.
To edit the settings of an access point, select
Edit. Follow the instructions from your service provider.
Connection name — Enter a descriptive name for the
●
connection.
Data bearer — Select the data connection type.
●
Settings
Settings Connection
> >
Options New
>
Options
>
>
157