Table of Contents
Advertisement
R and RSK).
8.2.2
Call diversion
"Call diversion" is to transfer calls to the specified phone according to your request.
Within the setting of "Call diversion", its success depends on network and SIM card. Mobile
phone will prompt the setting properly.
When setting the option, you need to input the correct phone number or voice mail number
for correctly transferring the call to the specified phone. If it is failed, please check the transferred
number set in the mobile phone is correct or not.
Unconditional when the option is set, all calls will be transferred to the specified number;
Busy when the option is set, the incoming call will be transferred to the specified number
when your mobile phone is busy;
No reply when the option is set, the incoming call will be transferred to the specified number
when you do not answer the call;
Unreachable when the option is set, the incoming call will be transferred to the specified
number when you are not in the service area (For example, when the network signal is not good or
the signal environment is very poor);
Cancel diverts to select the call diversion which is needed to cancel, press OK key to cancel
the diversion, press Back key to the return the previous menu;
Status to view the diversion status of all current calls.
8.2.3
Call waiting
"Call waiting" is to set whether permitting the call waiting or not. If it is closed, the phone is
busy. For example, when the third part is calling and it hears the busy tone.
8.2.4
Auto redial
"Auto redial" is to set whether permitting to redial automatically or not. Select On the system
will redial when the dialed call does not get through; select Off the system will not redial when the
dialed call does not get through.
8.2.5
Auto answer
"Auto answer" is to set whether permitting to answer automatically or not. (Only when insert
the earphone).
Select On the system will answer the incoming call automatically;
Select Off the function is invalid.
8.2.6
Flash dial
"Flash dial" can be set in the mobile phone. This is to use the number key of 2、 3、 4、5、6、
7、8、9to represent different phone number. When using on the idle screen, long press some
certain number of 2、3、4、5、6、7、8、9 to dial the corresponding number. If the number
key is not set with the phone number, the mobile phone will prompt "Phone number empty".
After enter the screen of setting the flash dial, there is different prompt for various situation
of setting speed dial according to the number key selected. If the number key has been set as speed
dial, the bottom of mobile phone will display the number and contact person specified; if not, it
will display "Not set".
M201
Us
er manual
33
Advertisement
Table of Contents
