Patriot Lighting LINCOLN PARK III Owner's Manual
  1. Manuals
  2. Brands
  3. Patriot Lighting Manuals
  4. Fan
  5. LINCOLN PARK III
  6. Owner's manual
Patriot Lighting LINCOLN PARK III Owner's Manual

Patriot Lighting LINCOLN PARK III Owner's Manual

52"
Hide thumbs

Advertisement

Table of Contents

52" LINCOLN PARK III
CEILING FAN
Owner's Manual
Model #20852
SKU # 355-2112
If a problem cannot be remedied or you are experiencing difficulty in installation, please
contact the Service Department: 1-877-459-3267, 8 a.m. - 5 p.m. Central Time, Monday - Friday.
1
10192 • 101424

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LINCOLN PARK III and is the answer not in the manual?

Questions and answers

Related Manuals for Patriot Lighting LINCOLN PARK III

Summary of Contents for Patriot Lighting LINCOLN PARK III

  • Page 1 52” LINCOLN PARK III CEILING FAN Owner’s Manual Model #20852 SKU # 355-2112 If a problem cannot be remedied or you are experiencing difficulty in installation, please contact the Service Department: 1-877-459-3267, 8 a.m. - 5 p.m. Central Time, Monday - Friday.

  • Page 2: Package Contents

    PACKAGE CONTENTS Unpack your fan and check the contents. You should have the following items: PACKAGE CONTENTS 1. Canopy 14. Switch Housing 2. Canopy Cover 15. Light Kit 3. Mounting Bracket 16. Finial Cap 4. Mounting Bracket Screw 17. Finial (x4) 18.

  • Page 3: Mounting Options

    DIMENSION REFERENCE A. 18.88 in. B. 13.27 in. C. 11.62 in. D. 11.18 in. E. 5.12 in. MOUNTING OPTIONS Three Mounting Options Closemount Downrod Mount Angled Ceiling Mount (Up to 16 degrees) Choose one of the following mounting options: Closemount is best suited for ceilings lower than 8 feet. It does not utilize the downrod. Downrod Mount is best suited for ceilings 8 ft.

  • Page 4: Safety Instructions

    SAFETY INSTRUCTIONS READ ALL SAFETY INFORMATION AND INSTALLATION INSTRUCTIONS BEFORE YOU BEGIN INSTALLING THE FAN AND SAVE INSTRUCTIONS. CAUTION: This fan is not suitable for damp or outdoor locations. All set screws of the fan must be checked and retightened where necessary before installation. To reduce the risk of personal injury, do not bend the blade brackets when installing the brackets, balancing the blades or cleaning fan.

  • Page 5: Care And Maintenance

    SAFETY INSTRUCTIONS WARNING: To avoid risk of electric shock, be sure to shut off power at the main fuse or circuit breaker box before installing or servicing this fixture. Turning off the electrical power by using the light switch is not sufficient to prevent electrical shock.
  • Page 6 ASSEMBLY INSTRUCTIONS 1. Turn OFF the electrical power at the main fuse or circuit breaker. DANGER: Failure to disconnect the power supply prior to installation may result in serious injury or death. Mounting 2. Loosen all four mounting bracket screws and Bracket Mounting completely remove the two screws from the round...
  • Page 7 ASSEMBLY INSTRUCTIONS DOWNROD MOUNT 5. Remove the downrod clip and downrod pin from the Downrod Clip downrod. Then, loosen but don’t remove the two set screws in the yoke of the motor assembly. Downrod Set Screw Yoke 36-Inch 6. Insert the downrod -- or a longer downrod (not Lead Wire included), if required -- through the canopy and yoke cover.
  • Page 8 ASSEMBLY INSTRUCTIONS 9. Make the following wire connections according to the diagram and these steps: • Lift the lever and then push the White (neutral) supply Black (hot) wire into the empty hole of the push-in connector White (neutral) preassembled to the white wire of lead wire and then lower the lever to secure wire.
  • Page 9 ASSEMBLY INSTRUCTIONS 13. Install the blade arm to the underside of the motor assembly with preinstalled motor screws. Tighten each blade arm completely before moving to the next. Motor Assembly Note: The notch in the fitter plate allows a Phillips screwdriver access to the motor screws.
  • Page 10 ASSEMBLY INSTRUCTIONS 17. NO LIGHT KIT INSTALLATION (OPTIONAL) Hex Nut Lock Washer To install the fan without the light kit, remove the preassembled hex nut and lock washer from the Switch Housing threaded rod inside the switch housing. Disconnect the single-pin connectors from inside the switch housing.
  • Page 11 OPERATING INSTRUCTIONS 1. Using a ceiling fan will allow you to raise your thermostat setting in summer and lower your thermostat setting in winter without feeling a difference in your comfort. In warmer weather, push the reverse switch to the left for downward airflow creating a wind chill effect.

  • Page 12: Troubleshooting

    TROUBLESHOOTING If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults, please check the Troubleshooting section below. If a problem cannot be remedied or you are experiencing difficulty in installation, please contact the Service Department: 1-877-459-3267, 8 a.m.

  • Page 13: Limited Lifetime Warranty

    Model No: 20852 Oil-Rubbed Bronze (SKU: 355-2112) Set forth below, the manufacturer warrants the fan motor for this Patriot Lighting ceiling fan to be free from defects in workmanship and material for the life of the product. Also, subject to the limitations below, the manufacturer warrants all ceiling fan parts (“ceiling fan parts”...

This manual is also suitable for:

20852355-2112

Table of Contents