Advertisement
Quick Links
Command Reference Guide
VIP-050 / VIP-450 SIP command Reference Guide
The VIP-050 / VIP-450 are SIP version 2.0 compliant voice gateways, which integrate a
web-based graphical user interface, and command line administration that can cover
most configurations and application demands.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Planet VIP-050
Summary of Contents for Planet VIP-050
- Page 1 Command Reference Guide VIP-050 / VIP-450 SIP command Reference Guide The VIP-050 / VIP-450 are SIP version 2.0 compliant voice gateways, which integrate a web-based graphical user interface, and command line administration that can cover most configurations and application demands.
- Page 2 PLANET VIP-050 /VIP-450 SIP Reference Guide TABLE OF CONTENTS ABOUT THIS GUIDE......................3 SIP COMMAND REFERENCE..................3 DIAL PLAN SET UP ......................6 CALL TRANSFER ......................7 CONFIGURATION EXAMPLE..................7...
- Page 3 PLANET VIP-050 /VIP-450 SIP Reference Guide ABOUT THIS GUIDE This VIP-050 / VIP-450 SIP (Session Initiation Protocol) Reference Guide provides SIP configuration commands. Before starting configurations, it is suggested to check the SIP connection requirement carefully, then configure the required value in machine. If you’re not sure which parameters should be inserted, please check this guide for corresponding parameters to establish the voice connection on your side.
- Page 4 PLANET VIP-050 /VIP-450 SIP Reference Guide show sip info_sw displays the information switch show sip auto_reg displays auto-registration on/off when reboot show sip nat_call displays nat_call switch show sip outboundproxy displays the outbound proxy set sip reg add - used to add registration information...
- Page 5 PLANET VIP-050 /VIP-450 SIP Reference Guide set sip cfg - used to set the configuration of sip set sip cfg [udp_ctl_port] [rtp_data_port] Syntax description udp_ctl_port <udp control port>|( 0 : default port will be used) rtp_data_port <rtp data port>|( 0 : default port will be used)
- Page 6 PLANET VIP-050 /VIP-450 SIP Reference Guide set sip nat_call used to set nat_call switch on/off whether the gateway in public IP is to receive calls from the private IP or not. The default is on set sip nat_call [on/off] set sip outboundproxy add...
- Page 7 PLANET VIP-050 /VIP-450 SIP Reference Guide Calling destination in PLANET H.323 voice gateways can be added via following commands: atpm dadd [dest_id] h323 [dest ip addr] [port] atpm dadd [dest_id] dns [dest host name] [port] In VIP-450 the “h323” part in the command is replaced by “sip”:...
- Page 8 PLANET VIP-050 /VIP-450 SIP Reference Guide ITG>set sip reg 2001 500 1 211.20.1.5 5060 0 0 Then you need set up the server. ITG>set sip cfg 0 0 Then you need set up the server. ITG>set sip proxy 1 211.20.1.1 5060 In order to support the complete function, you need to set a port cid number.
Need help?
Do you have a question about the VIP-050 and is the answer not in the manual?
Questions and answers