Elo TouchSystems Pay 10 Quick Installation Manual

Contents:
• 1 x ELO Pay 10"
• 1 x Base Plate
• 1 x Flat Head Screw: M4 x 12mm long
1
• 1 x Pan Head Screw: M3 x 7mm long
2
Learn more about Elo at EloTouch.com
America
Tel +1 408 597 8000
EloSales.NA@elotouch.com
The information in this document is subject to change without notice. Elo Touch Solutions, Inc. and its Affiliates
(collectively "Elo" ) makes no representations or warranties with respect to the contents herein, and specifically
disclaims any implied warranties of merchantability or fitness for a particular purpose. Elo reserves the right to revise
this publication and to make changes from time to time in the content hereof without obligation of Elo to notify any
person of such revisions or changes.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into
any language or computer language, in any form or by any means, including, but not limited to, electronic, magnetic,
optical, chemical, manual, or otherwise without prior written permission of Elo Touch Solutions, Inc.
Elo and the Elo logo are either trademarks or registered trademarks of Elo Touch Solutions, Inc.
© 2024 Elo Touch Solutions, Inc. All rights reserved.
Europe (EMEA)
Tel +32 16 930 136
EMEA.sales@elotouch.com
Asia Pacific
Tel +86 (21) 3329 1385
EloAsia@elotouch.com
Quick Installation Guide
www.EloTouch.com
Elo Pay 10"
Revision A
P/N QIG600286