ekwb EK-Quantum Vector3 Astral RTX 5090 User Manual page 14

ATTACHING THE BACKPLATE
INSERTING THE GRAPHICS CARD INTO THE CHASSIS
Carefully lift your graphics card with the installed water block and
insert it into your PC's motherboard PCI Express expansion slot.
Please keep in mind that your graphics card is heavier than before it
was equipped with the water block.
You need to be very careful when handling the graphics card. Avoid
all unnecessary manipulation of the water block assembly that
might damage your card or water block.
STEP 1
Position the Backplate (including screws and standoffs) onto the
GPU PCB. Make sure all the holes are aligned. Tighten the screws
evenly.
Do not use excessive force!
For this step, you will need:
Phillips Head
Screwdriver
STEP 1
- 14 -