ekwb EK-Quantum Vector3 Astral RTX 5090 User Manual page 13

CUTTING AND PLACING THERMAL PADS - PCB PWR CONNECTOR
STEP 1
Use one (1) Thermal pad BP Chip 30x30x1 mm and cut in half so
you get two (2) pcs of 30x15x1 mm. One (1) pc of 30x30x1 mm is
already precut in the set.
Stack all three (3) pcs and place them on the PCB.
Thermal Pad - BP Chip - 30x30x1
STEP 1
- 13 -