Tektronix ADA400A Instruction Manual page 7

Review the following safety precautions to avoid injury and prevent damage to
this product or any products connected to it.
Only qualified personnel should perform service procedures.
Avoid Electric Overload == To avoid electric shock or fire hazard, do not apply a voltage to a terminal that is
outside the range specified for that terminal.
Ground the Product — This product is grounded through the grounding conductor of the oscilloscope
power cord. To avoid electric shock, the grounding conductor must be connected
to earth ground. Before making connections to the input or output terminals of
the product, ensure that the product is properly grounded.
Do Not Operate Without —To avoid electric shock or fire hazard, do not operate this product with covers or
Do Not Operate in To avoid electric shock, do not operate this product in wet or damp conditions.
Wet/Damp Conditions
Do Not Operate in = To avoid injury or fire hazard, do not operate this product in an explosive
Explosive Atmosphere —_ atmosphere.
Product Damage Precautions
Do Not Operate With —_If you suspect there is damage to this product, have it inspected by qualified
Suspected Failures service personnel.
Do NotImmerse in Liquids Clean the instrument using only a damp cloth. Refer to cleaning instructions.
ADA4O00A Instruction Manual iii