Installing With A Lap-Belt - Britax PRINCE Manual

Prince_Page_7.pdf
Installing with a lap belt
IMPORTANT
marked in the child restraint.
Have you adjusted the harness to the correct position for your child?
If not, see Stage 1 on page 3.
1
Place the PRINCE forward facing
on the car seat and pull the harness
tight.
C
M
4
Y
CM
MY
CY
Before going any further make sure that the the lap belt passes below
both lap belt guides.
6
The PRINCE should now be
secure - see buckle position on
page 8.
12/09/2008 15:14:54
- Do not use any load bearing contact points other than those described in the instructions and
2
Pass the lap belt through both side
slots.
Skeleton
view
3
Fasten the lap belt.
5
Lap belt
guide
Carefully kneel on the PRINCE to
push it into the car seat and pull the
lap belt tight.
Removing the PRINCE from the car
Simply unfasten the seat-belt.
page 7