Prince_Page_10.pdf
Stage 4 - Looking after the PRINCE
Removing the covers
1
Loosen the harness by pushing the adjuster button in
as you pull the shoulder straps forward as much as
possible.
C
3
M
Y
CM
MY
CY
Gently pull the cover off from the top of the seat,
easing the buckle, chest pads and harness straps through
their slots.
To refit the cover simply reverse the above instructions.
Make sure the shoulder straps are threaded through
the chest pads and that there are no twists in the
harness.
Cleaning the covers
Please read the labels on the covers for washing
instructions. The covers are machine-washable.
Cleaning the harness, chest pads and seat
ONLY USE
mild hand soap and warm water.
DO NOT
take apart, or attempt to take apart, any of
the harness when cleaning the harness and seat. It is
unnecessary and dangerous to do so.
page 10
12/09/2008
15:15:46
2
Pull the connection piece out from behind the
seat-belt guard. Unhook the shoulder straps from the
connection piece. Pull them through to the front of
the seat and out of the chest pads.
Unfasten the buckle.
- The cover is a safety feature.
IMPORTANT
NEVER
use the PRINCE without it.
tumble dry the covers — drip dry only.
DO NOT
use solvents, detergents or washing-up
DO NOT
liquid as these may weaken the harness and the seat.
.