Trotec Promarker Operation Manual page 13

Promarker
Operation Manual
4.4 General Safety Instructions
09/01/2012 Trotec Produktions- und Vertriebs GmbH_Linzer Strasse 156, A-4600 Wels, Austria, Technical Support
tel_+43 (0)7242 239-7000, fax_+43 (0)7242 239-7380, e-mail:
Risk posed by the incorrect actions of untrained individuals!
The improper use of the machine can lead to injury and/or damage to
the machine.
Inform personnel about the machine's function and any
•
other risks and record this in the training records.
Observe official regulations regarding the operation of
•
machines and accident prevention regulations.
Risk posed by missing, faulty or bridged safety installations and
machine components!
Faulty or missing safety installations and machine components can
lead to death, injury and/or damage to the machine.
Check carefully that safety installations and machine
•
components are functioning properly and are fault free.
The specified actions should be undertaken immediately if
•
parts are faulty or defective.
Risk posed by incorrect operation (in particular in setup-mode)!
Setting and operating the machine with limited knowledge of its
function can lead to injury and/or damage to the machine.
Read and observe the operating and safety instructions
•
before commissioning the machine!
Risk posed by incorrect operation by unauthorised individuals!
Setting and operating the machine with limited knowledge of its
function can lead to injury and/or damage to the machine.
Never leave the machine unattended while in operation.
•
Turn off the machine at the main switch when not in use.
•
Risk posed by missing machine signage!
Making the wrong assumptions can lead to the risk that the machine is
operated incorrectly.
Replace missing machine signage.
•
techsupport@troteclaser.com
13 / 43