Chappee NXR3 Installation And Maintenance Manual page 2

1. S
tandards -
COMPAGNIE INTERNATIONALE DU CHAUFFAGE does
not accept any liability for damage caused by work that
does not comply with these instructions and/or which
has not been carried out by a qualified installer.
This boiler design complies with the following European
directives:
Directive Mains voltage
Directive Electromagnetic
compatibility
Directive Efficiency
This boiler complies with the following standards:
EN 303.1 • Boilers with forced air burner: Terminology,
general specifications, tests and marking
EN 303.2 • Boilers with forced air burner: Special
specifications for boilers with sprayed oil
burner
EN 304 • Test regulations for boilers with sprayed oil
burner
DIN 4791 • Boiler and burner connections
Réf. : CI - 405 - A
R
egulations
The boiler can be fitted with a choice of fuel oil or gas burner
in accordance with the builder's recommendations, the burner
complying with the following standards:
73 / 23 / CEE
89 / 336 / CEE
EN 267
EN 676
92 / 42 / CEE EN 226
The heating system installation must comply with current
regulations.
In particular:
DTU 65
DTU 65.4
DTU 65.11
Installers' Association agreement of 2 July 1969.
COMPAGNIE INTERNATIONALE DU CHAUFFAGE hereby
attests that all boilers referred to in this manual comply
the same requirements as corresponding examined
types, for which the right to use EC marking has been
granted according to "Gas appliance" and "Boiler
efficiency" European directives.
2
• One piece sprayed oil burner
• Automatic blown air burner for gas fuels
• Burner to heat generator connection sizes
• Central heating systems in buildings
• Gas and liquid hydrocarbon boilers
• Safety systems for central heating systems
in buildings