Fortinet FortiGate Rugged 70F Series Quick Start Manual page 5

Front - FGR-70F
3
COM1/COM2
1 2
7
12-125V
9
1
STA
Green: Operating normally
Green: Device resetting
Flashing
Red: Device error
ALM
Red: Major alarm detected
Amber: Minor alarm detected
Off: No alarm detected
HA
Green: HA enabled (normal)
Red: HA enabled (failover)
Off: HA disabled
PWR
Green: Power detected
Off: Power not detected
BLE/RST Activates BLE management or restores to factory default
8
4 5
3/4
1/2 WAN1/WAN2
6
– BYP
FortiGate Rugged 70F
BLE
SFP1
11
10
2
USB (USB 2.0) Server port
3
COM1 (RJ45) Console
(Top Port)
COM2 (RJ45) Serial Data
(Bottom Port)
4
Ports 1 to 4 (RJ45)
SPEED
ACT
5
WAN1 & WAN2 Ports (RJ45)
SPEED
ACT
8
SFP2
6
Bypass Status
8
BLE
9
Power Terminals (DC1 & DC2) Redundant failover, 12V to 125V DC, 2A Max
(Note: Alarm disabled by default in the OS. Wire range is 30 - 16 AWG)
10
Digital I/O Connector software-defined alarms. See page 17 for details.
Input (IN1 & IN2)
11 SFP1 & SFP2 (SFP)
Green: Connected at 1000Mbps
Amber: Connected at 100Mbps
Off: No link established or connected at 10Mbps
Green: Link established, no activity
Flashing Green: Data activity
Off: No link established
Green: Connected at 1000Mbps
Amber: Connected at 100Mbps
Off: No link established or connected at 10Mbps
Green: Link established, no activity
Flashing Green: Data activity
Off: No link established
Green: PHY mode
Red: Bypass mode
Blue: BLE connected
Flashing Blue: BLE active
Off: BLE off
Green: Power detected
Red: Alarm is on; no power detected
Off: No power detected
Green: Alarm defined, not detected
Red: Alarm detected
Off: Alarm not defined
Green: Connected at 1000Mbps
Flashing Green: Data activity
Off: No link established
ACT SPEED
ACT SPEED
RJ45 Ports
7
Earth Ground optional connection
Output(OUT)
Green: Alarm defined, not detected
Flashing Red: Major output alarm
Red: Minor output alarm
Off: No output alarm detected
9