Roland SH-101 Owner's Manual page 35

35
Playing (cont'd)
* In case there are only the shortest time
values and no slar, a slightly different
type of sequence is available by setting
the GATE/TRIG selector switch in the
Envelope Generator to the LFO posi-
tion.
ee a: Ss cee |
t
rest
Bl fi Da Va! Da fa
GATE
ENV in GATE
+ TRIG mode
ecxitrom) — LLU LIU
ENV in
LFO mode t
PLAY
START
Correcting and Adding
(Editing)
Sequencer Play & Extra
function
lf you wish to correct or/and add some ~
more to the data you have stored, run the
sequencer just before the part you want to
change, and while the very last note is
Last note
being played, press the LOAD button.
(Setting the LFO/CLK Rate to slow makes
the operation easier.) Then start re-loading
in the same way as usual loading.
4
—-———O Data previously loaded'
o——___-—_————— Corrected data
<NOTE>
When the corrected data are shorter than
the data previously loaded, there will be
the old data still left and played.
Loading go
Lon
If you start re-loading from the beginning,
the previous data will be all cancelled
immediately (automatically).
This part will be played.
Last note
Sequencer Play & Key
Transpose
Refer to P.36.
Data previously loaded.
ne
Press the PLAY
or LOAD button.
* The BENDER and PORTAMENTO
work even while the sequencer is oper-
ating.