Roland SH-101 Owner's Manual page 34

34
Loading (cont'd)
<BASIC>
Tie
<APPLICATION>
* This sequencer can store up to 100
steps, but the shortest time value is
counted as one step, and the longer time
values cost more steps.
If all 100 steps are stored, the SH-107
will return to normal playing condi-
tion, even if the sequencer is in LOAD
mode.
No matter how you play the notes,
all will be stored in the same time
values.
Load the first note, then press the next
note while holding the LEGATO button
down.
* In this example, a %s note is regarded as the shortest time value {a step).
HARTER
2 | ITT
Press the REST button, the shortest
3 rest will be memorized.
d? ™—-2 +m
The impression of the melody varies de-
pending which pattern you choose. Also,
the setting of the Envelope Generator
affects the sound. Select the appropriate
pattern and setting according to your
taste*.
* This does not apply to the decay sound
whose sustain level is zero.
Press the button as many times as needed.
Now you have set the length of notes and rests.
* Transpose function is available with the
TRANSPOSE switch in the Controllers
Section. Thereby, the total pitch range
available for storing comes to 56 keys.
Playing
* Press the PLAY button (the indicator
lights up), the notes stored previously
will be played. All are played in non-
legato except for those stored in a
legato manner.
* When the last note is played, it will go
back to the beginning of the piece and
be repeated until! you press the PLAY
button again. Tempo is controtled by
using the LFO/CLK RATE knob.
* When storing slars, remember to set the
GATE/TRIG selector switch in the En-
velope Generator to the GATE position
before playing.
%* When the Hold Pedal (Refer to P.39} is
being used, you can stop the sequence
by stepping on the Pedal and releasing
it.