Roland SH-101 Owner's Manual page 33

33
Sequencer The SH-101 contains a digital sequencer
which can store and play up to 100 steps.
When you wish to load the notes, divide
the longer time values by the shortest
time value (Refer to the example shown
below).
e.g, : = the shortest time value {a step)
@ LOAD button @) LEGATO button (This works only in
Press this button when you wish to store LOAD mode)
notes, and press it again to stop storing. Press this button when you wish to store
a slar or tie.
@ PLAY button © LFO/CLK RATE
Press this button when you wish to play The tempo of the sequencer can be con-
the stored notes, and press it again to stop trolled by the LFO/CLK RATE in the
playing. Modulator section.
@ REST button (This works only in * [UL (EXT CLOCK) Refer to P.38.
LOAD made)
Press this button when you are storing <Note> ae
paces. You can load into the built-in sequencer
only from the keyboard of the SH-101.
Loading from any other unit is impossible.
Loading
Press
the LOAD button
(the indicator
Long time values, rests and tegato playing
tights up) and play the keyboard, only the
pitches of the notes played will be stored.
No matter how you play, the time values
will turn out the same. How you regard
this time value (32 , ) or ! etc.) is entirely
up to you, but this should be regarded as
the shortest time value.
Nt
-o-
ra
can be also stored. {Refer to the table shown
in the next page}
Press the LOAD button again when the
loading is completed.
a
——+( PROGRAMMING )—— El
ea