LAUNCH TECH X-431 V+ V4.0 User Manual page 22

LAUNCH
2.7 Network Setup
The tablet has built-in Wi-Fi that can be used to get online. Once you're online,
you can register your tool, surf the Internet, get apps, send email, launch the
remote diagnosis, and check for software updates etc.
2.7.1 Connect to a Wi-Fi network
1. On the home screen, tap Settings -> Network & Internet -> WLAN.
2. Slide the Wi-Fi switch to ON, the tablet starts searching for available wireless
networks.
3. Select a wireless network,
 If the chosen network is open, the tablet will connect automatically.
 If the selected network is encrypted, a network password will need to be
entered.
4. When Connected appears, it indicates the Wi-Fi connection is complete.
Note: When Wi-Fi is not required, this should be disabled to conserve battery
power.
2.7.2 Disconnect from a Wi-Fi network
1. On the home screen, tap Settings -> Network & Internet -> WLAN.
2. Tap the network with a Connected status, then tap Disconnect.
X-431 V+ V4.0 User Manual
15