Replacing The Battery Of The Transmitter Belt - Suunto T6 User Manual

NOTE! Replace the battery with extreme care to ensure that your Suunto t6
remains water-resistant. Careless battery replacement may void the warranty.
NOTE! Recycle the old batteries or dispose of them properly. If a battery is
mechanically damaged, burned or dropped in water, there is a risk of fire or burns.
12. REPLACING THE BATTERY OF THE
TRANSMITTER BELT
The transmitter belt operates on a three-volt CR 2032 lithium cell. The average
expected battery life of the transmitter belt is around 300 hours. If your Suunto t6
is not receiving an HR signal when the transmitter belt is worn, you might need to
replace the battery. We recommend using only original Suunto batteries in your
transmitter belt, as they come with a new battery cover and O ring, and replacing
the battery cover each time you replace the battery. This ensures the best possible
battery life and the water resistance of the transmitter belt.
Replacing the battery:
1. Use a coin or the battery compartment key to turn the battery compartment cover
of the transmitter belt to the open position or slightly over it, making the cover
easier to open.
2. Open the battery compartment cover and remove the old battery.
3. Install the new battery in the battery compartment with the positive side (+) facing
up.
EN
29