Battery Replacement Of The Transmitter Belt - Suunto X6HR Instruction Manual

1.4. BATTERY REPLACEMENT OF THE
TRANSMITTER BELT
The transmitter belt operates on a 3-Volt lithium
cell, type: CR 2032.
The transmitter belt's average expected bat-
tery life is 300 hours of use in ideal operating
temperatures.
When X6 is not receiving a signal but the
HR
transmitter belt is active, a change of battery
might be necessary. Refer to chapter 2.4. for
other factors that may interfere with the cor-
rect signal.
To change the battery
1. Insert a coin into the slot located on the bat-
tery compartment cover on the backside of
the transmitter belt.
2. Turn the coin counterclockwise until it is
aligned with the open position marker, or even
slightly further for easy opening.
3. Remove the battery compartment cover. En-
sure that the O ring and all surfaces are
clean and dry. Do not stretch the O ring.
4. Carefully remove the old battery.
5. Place the new battery into the battery com-
partment with the positive side facing up.
9