Table of Contents
Advertisement
S
S
UPER
ERVER 6025B-TR+/6025B-8R+ User's Manual
1-3
Server Chassis Features
The following is a general outline of the main features of the SC825TQ-R700LP/
SC825S2-R700LP server chassis.
System Power
The SC825TQ-R700LP/SC825S2-R700LP features a redundant 700W power sup-
ply composed of two separate power modules. This power redundancy feature
allows you to replace a failed power supply without shutting down the system.
SCSI Subsystem (6025B-8R+ only)
The SC825S2-R700LP chassis was designed to support eight dual-channel SCSI
hard drives, which are hot-swappable units.
Note: The operating system you use must have RAID support to enable the hot-
swap capability of the SCSI drives.
Serial ATA Subsystem
The SC825TQ-R700LP supports up to eight 3 Gb/s Serial ATA drives. The Serial
ATA drives are hot-swappable units and are connected to a backplane that provides
power and control.
Note: The operating system you use must have RAID support to enable the hot-
swap capability of the Serial ATA drives.
Front Control Panel
The control panel on the SuperServer 6025B-TR+/6025B-8R+ provides you with
system monitoring and control. LEDs indicate system power, HDD activity, net-
work activity, system overheat and power supply failure. A main power button and
a system reset button are also included. In addition, two USB ports have been
incorporated into the control panel to provide front side USB access.
I/O Backplane
The SC825TQ-R700LP/SC825S2-R700LP is an ATX form factor chassis designed
to be used in a 2U rackmount confi guration. The I/O backplane provides seven
low-profi le PCI expansion slots, one COM port, a parallel port, a VGA port, two USB
2.0 ports, PS/2 mouse and keyboard ports and two gigabit Ethernet ports.
1-4
Advertisement
Table of Contents
